Author |
Message |
Skipbarberman
| Posted on Sunday, April 26, 2020 - 02:03 pm: |
|
Did a couple of XB9Rs over, and have a bunch of parts to get rid of. Instead of posting on eBay with exorbitant fees, I figured I'd do some forum members a service and try to unload a bunch of it here inexpensively. All parts are USED and working when removed unless stated otherwise. I have to name a few (rattling off the top of my head) from memory: - (1) 2003 cast silver front wheel w/ bearings/seals (~2k mi) - (1) 2003 cast silver rear wheel w/ bearings/seals (~2k mi) - (1) original Buell Pegasus/comfort front seat - (1) original Buell Pagasus/comfort pillion seat - (1) 2005 stock, single outlet muffler - (1) modified D&D muffler - OPEN EXHAUST - (1) XB Firebolt rear sub-frame - (1) 2003 fuel pump (loud - as they often are, but works fine) - (1) 2003 XB9 throttle body w/ injectors (working when removed to install XB12) - (1) 2005 XB9 stock stainless header - (1) 2003 front brake rotor - (1) 2003 front brake caliper - (1) 2003 rear brake caliper - (1) complete 2003 (11mm) belt/pulley/tensioner setup (belt is in VGC) - (1) set of LSL bars for Firebolt conversion - (1) Buell XB Tail bag - (1) High Beam unit - (1) Oil Pump (~9,600 mi) - (1) set of std. bore pistons/ring/jugs (~9,600 mi) - (1) complete set of 2003 XB9R camshafts - (1) set of rider foot pegs - (1) stock 2003 shock (~9600 mi) - (1) stock rear caliper (Message edited by skipbarberman on April 26, 2020) |
Skipbarberman
| Posted on Sunday, April 26, 2020 - 04:21 pm: |
|
Whoops, if intereested.....skipbarberman at geemail dot com. |
Cupcake_mike
| Posted on Monday, April 27, 2020 - 12:42 pm: |
|
sent you an email (mikeftbl52) |
Smorris
| Posted on Monday, April 27, 2020 - 02:52 pm: |
|
email to u this AM |
Skipbarberman
| Posted on Monday, April 27, 2020 - 05:01 pm: |
|
Pegasus front and rear seats - SOLD (Message edited by skipbarberman on April 27, 2020) |
Skipbarberman
| Posted on Monday, April 27, 2020 - 05:02 pm: |
|
While dusting off the tail bag, found a TANK BAG. |
Skipbarberman
| Posted on Monday, April 27, 2020 - 08:08 pm: |
|
Tank/Tail Bags - SOLD (Message edited by skipbarberman on April 27, 2020) |
97bueller
| Posted on Tuesday, April 28, 2020 - 03:55 pm: |
|
Pictures of exhaust please. clapage87@gmail.com |
Skipbarberman
| Posted on Tuesday, April 28, 2020 - 04:31 pm: |
|
Still have..... - (1) 2003 cast silver front wheel w/ bearings/seals (~2k mi) - (1) 2003 cast silver rear wheel w/ bearings/seals (~2k mi) - (1) 2005 stock, single outlet muffler - (1) modified D&D muffler - OPEN EXHAUST - (1) XB Firebolt rear sub-frame - (1) 2003 fuel pump (loud - as they often are, but works fine) - (1) 2003 XB9 throttle body w/ injectors (working when removed to install XB12) - (1) 2005 XB9 stock stainless header - (1) 2003 front brake rotor - (1) 2003 front brake caliper - (1) 2003 rear brake caliper - (1) complete 2003 (11mm) belt/pulley/tensioner setup (belt is in VGC) - (1) set of LSL bars for Firebolt conversion - (1) High Beam unit - (1) Oil Pump (~9,600 mi) - (1) set of std. bore pistons/ring/jugs (~9,600 mi) - (1) complete set of 2003 XB9R camshafts - (1) set of rider foot pegs - (1) stock 2003 shock (~9600 mi) - (1) very light weight fiberglass under-tail, with directional indicators painted blue |
Uly4me
| Posted on Wednesday, April 29, 2020 - 08:56 pm: |
|
how much for the d&d muffler |
Cvc
| Posted on Thursday, April 30, 2020 - 02:04 am: |
|
Pics on LSL bars . Interested in rider foot pegs and camshaft. If you had a front head and piston too I’d be interested. Thanks CV Pm sent on contact info |
Skipbarberman
| Posted on Thursday, April 30, 2020 - 03:24 pm: |
|
Quite a few questions about/inquiries on the D&D muffler. It is gutted, so effectively straight pipes. Looking for $20 + actual shipping
(Message edited by skipbarberman on April 30, 2020) |
Skipbarberman
| Posted on Thursday, April 30, 2020 - 03:27 pm: |
|
CVC - Pics on LSL bars to follow. I have the original OEM jugs/pistons and cams. No heads |
Skipbarberman
| Posted on Thursday, April 30, 2020 - 04:06 pm: |
|
LSL bars only attached
|
Skipbarberman
| Posted on Thursday, April 30, 2020 - 04:09 pm: |
|
Rider footpegs with brackets, $50 plus actual shipping
(Message edited by skipbarberman on April 30, 2020) (Message edited by skipbarberman on April 30, 2020) |
Skipbarberman
| Posted on Thursday, April 30, 2020 - 04:21 pm: |
|
Found some other stuff too XB/1125 Front rotor XB/1125 Rear rotor XB Rear Shock 2003 plastic belt guards 2003 XB complete airbox (base-plate, snorkel, OEM race filter (K&N) and cover) |
Bluell
| Posted on Thursday, April 30, 2020 - 05:23 pm: |
|
Is there an exhaust actuator in the air box? I don’t need the air box just the actuator. |
Skipbarberman
| Posted on Thursday, April 30, 2020 - 05:34 pm: |
|
Sadly, no. Both XB9s, so no actuator. (Message edited by skipbarberman on April 30, 2020) (Message edited by skipbarberman on April 30, 2020) |
Skipbarberman
| Posted on Saturday, May 02, 2020 - 07:49 pm: |
|
All - hit me with requests....if I have it, I'm happy to get it out ASAP. |
Spuds
| Posted on Saturday, May 02, 2020 - 08:55 pm: |
|
Hey there... Looking for xb-r stuff: qty 2 -- rider footpeg pins, springs and c-clips Front signal lights Seat lock backing plates (both of them) relay box cover Let me know if you have anything. Shipping would be to Ottawa, Ontario. Thanks |
Skipbarberman
| Posted on Sunday, May 03, 2020 - 01:25 pm: |
|
Spuds - See above rider footpegs pics. I will be shipping from Melrose, NY (not far, few hours away) zip code is 12121. I can get them out tomorrow if interested. - Sean |
Skipbarberman
| Posted on Thursday, May 07, 2020 - 11:43 am: |
|
Still have..... - (1) 2005 stock, single outlet muffler - (1) modified D&D muffler - OPEN EXHAUST - (1) XB Firebolt rear sub-frame - (1) 2003 fuel pump (loud - as they often are, but works fine) - (1) 2003 XB9 throttle body w/ injectors (working when removed to install XB12) - (1) 2005 XB9 stock stainless header - (1) 2003 front brake rotor - (1) 2003 front brake caliper - (1) 2003 rear brake caliper - (1) complete 2003 (11mm) belt/pulley/tensioner setup (belt is in VGC) - (1) set of LSL bars for Firebolt conversion - (1) High Beam unit - (1) Oil Pump (~9,600 mi) - (1) set of std. bore pistons/ring/jugs (~9,600 mi) replaced with NRHS 1050 kit - (1) complete set of 2003 XB9R camshafts - (1) set of rider foot pegs - (1) stock 2003 shock (~9600 mi) - (1) very light weight fiberglass under-tail, with directional indicators painted Battle Blue |
Skipbarberman
| Posted on Sunday, May 10, 2020 - 12:15 pm: |
|
- (1) 2005 stock, single outlet muffler - (1) modified D&D muffler - OPEN EXHAUST - (1) XB Firebolt rear sub-frame - (1) 2003 fuel pump (loud - as they often are, but works fine) - (1) 2003 XB9 throttle body w/ injectors (working when removed to install XB12) - (1) 2005 XB9 stock stainless header - (1) 2003 front brake rotor - (1) 2003 front brake caliper - (1) 2003 rear brake caliper - (1) complete 2003 (11mm) belt/pulley/tensioner setup (belt is in VGC) - (1) set of LSL bars for Firebolt conversion - (1) High Beam unit - (1) Oil Pump (~9,600 mi) - (1) set of std. bore pistons/ring/jugs (~9,600 mi) replaced with NRHS 1050 kit - (1) complete set of 2003 XB9R camshafts - (1) set of rider foot pegs - (1) stock 2003 shock (~9600 mi) - (1) very light weight Ermax fiberglass under-tail, with directional indicators painted Battle Blue (Message edited by skipbarberman on May 10, 2020) |
Skipbarberman
| Posted on Monday, May 11, 2020 - 10:08 pm: |
|
Also have a stock XB shifter with linkage if anyone is interested. PM me with any parts requests. I have a fair amount of stuff. |
Skipbarberman
| Posted on Tuesday, May 12, 2020 - 10:39 pm: |
|
Bumping for any offers. |
Mstrfrz
| Posted on Wednesday, May 13, 2020 - 02:28 pm: |
|
I might be interested in that shifter if it can work on an X1 |
Skipbarberman
| Posted on Thursday, May 14, 2020 - 01:10 pm: |
|
Bumping. PMs replied to. |
Skipbarberman
| Posted on Thursday, May 14, 2020 - 10:06 pm: |
|
Next up, front & rear brake rotors... Front (4.80mm) Rear (4.92mm)
|
Skipbarberman
| Posted on Thursday, May 14, 2020 - 10:07 pm: |
|
Rear (4.92mm)
|
Mstrfrz
| Posted on Friday, May 15, 2020 - 05:54 pm: |
|
how about the fuel rail/manifold/connect to the injectors thingie? |
|