| Author | Message | ||
     Prior |
Going to post these again as the last thread got lost in archives and was a mess... All parts (unless noted) are from a 1997 Buell S3. Prices do NOT include shipping. For smaller parts, I prefer to do USPS flat rate + insurance; small stuff is $7.50, medium boxes $12.50, anything larger is shipped parcel post based on weight and size (max is usually ~$30) WP forks and top clamp, great shape: $250   Ignition switch and key: $50  Tail section: paint is this root beer and orange color, will need to be repainted. Has a few minor, repairable cracks around the tail light area: $50    Manta Ray tank, same paint, typical bubbling for a repainted tank. Includes gas cap and petcock- no rash or scrapes: $60  S3 frame/title- will come with bill of sale only, great shape (Previous owner did not want to deal with title transfer, will send title, can be transfered with appropriate documentation): $200   Swing arm (steel, with adjusters): $65   engine mounts (front mount and rear swingarm block): $60.00  1999 X1 ECM: $50 Gray rear wheel, good shape: $50 I do have other smaller parts available as well, let me know what you may need. I can provide additional pics if needed. Prior (Message edited by awprior on October 01, 2010) | ||
| Sleez |
97 S3T frame based on the VIN | ||
| Prior |
Lee, Think you are correct. Just called it an S3 since none of the 'T' parts were there aside from the dash. Good looking bike in your profile pic, I have the original tank from that, courtesy of my neighbor Ferris, with a bunch of signatures from all over the continent... Was looking for you at Homecoming to buy you a beer on Jerry's behalf, but either didn't meet up, or had a few too many before hand... (Message edited by awprior on October 01, 2010) | ||
| Prior |
Bump... In a few more weeks, these will go off to the barn to be saved for future needs. | ||
| Prior |
A few additions: S3T and S3 Dash with speedo (will separate, tach is sold) $50  Speedo Sensor: $15  Rear brake caliper (Brembo) $30  Control switches- make offer  Harness with ignition module etc: $50  Rear brake caliper bracket: $10  Oil tank: $15  Front brake reservoir, master cyl, brake line, lever etc: $40  Rear reservoir and master cyl, including NEW spare cylinder: $35  Prices do not include shipping, I prefer to ship USPS and can usually get anywhere within the US in 2-3 days. I've also got a pile of misc parts and hardware from this bike, let me know if there's something you are looking for. Thanks! | ||
| Phoebe |
Hi, are your forks and triples still available? | ||
| Prior |
Phoebe, They are. Check your email. Prior | ||
| Bishopjb1124 |
Prior send No_Rice a PM he was looking for a manta tank. Jimmy | ||
| Dan9460 |
I could use the handlebar switches...the ones I need are 71831-97y and 71830-97Y for a S1...1997... | ||
| Prior |
I'd assume all of the 97s use the same handlebar switches, but I am not sure- My S3 parts catalog is for a 99 too. I'm on the road today and tomorrow morning, but will check Wednesday to see if there's a part number on them somewhere. Alex | ||
| Phelan |
I would like the rear caliper bracket. | ||
| Lake_bueller |
Alex... Do you have a set of mirrors? Dennis | ||
| Buellsrule |
Do you have the intake manifold? | ||
| Prior |
Dennis, Mirrors sold a while ago. Sorry! Would loved to help you out with them. Ross, Sent you a PM on the brake caliper bracket. Frank, I did not get any engine components with this frame. Sorry! | ||
| Funjimmy |
I really need the stem bolt from the fork assembly. Could I get it and the oil tank? Thanks | ||
| Prior |
Jim, The forks have sold, and I the bolt is going with them so it's a complete set. Sorry. Oil tank is still available, I'll send you a PM with some details... Alex | ||
| Dan9460 |
Pm Sent on Switches | ||
| Prior |
Phoebe and Ross, Dropped your parts off at the post office this afternoon; expect them in a few days. Phoebe, I'd open your box in the garage- I used LOTS of styrofoam to pad the forks... | ||
| Gostaz |
If you still have the Manta, I'll take it off your hands. PM me the details of how to pay you | ||
| Prior |
Tank is still available. Check your email... | ||
| Phoebe |
Awesome. Thanks, Alex! | ||
| Prior |
Gostaz, Shot you a PM on the tank last week but did not hear anything back- maybe PMs are not working again... Let me know! Alex | ||
| Prior |
Remaining parts and prices: rear wheel (gray) $50.00 Speedo $30.00 S3 and S3T Dash $10.00 Swingarm (tube construction) $65.00 Tail Section $50.00 Foot pegs (4) $20.00 Foot peg mounts $20.00 rear caliper $30.00 shock (Pre-recall, with M2 reservoir) $50.00 engine mounts (front mount and rear swingarm block) $60.00 ignition module $20.00 front axle $15.00 Front master cyl $30.00 Rear master cyl (with extra new plunger) $35.00 Old style exhaust Bracket $10.00 Shock Mount $15.00 Petcock (spare) $5.00 Kickstand spring $3.00 S3 frame/title $200.00 Speedo Sensor $20.00 Tank $60.00 ign switch w/key $50.00 XB12R Clutch Cable (brand new in box) $20.00 1999 X1 ECM $50.00 (Message edited by awprior on November 08, 2010) | ||
| Prior |
Dug a few more parts out of my folk's basement... S1 front fender, has some rash on it but looks to just be in the paint, not in to the base plastic. $30, we can work something out for shipping.   | ||
| Bcurvin |
If you've still got these would you please send me a price for all those listed below including shipping to 28716. Thanks, Brent Remaining parts and prices: Swingarm (tube construction) $65.00 engine mounts (front mount and rear swingarm block) $60.00 Speedo Sensor $15.00 | ||
| Prior |
Brent, Shot you a PM- those parts are available. Alex | ||
| Velocity |
I'll take the S3 dash, for 10.00 please. Let me know. Scott | ||
| Prior |
Scott, I have a regular S3 dash as well as an S3T dash- which are you interested in? I'll not be able to ship until probably Saturday, have been working some crazy hours the last few weeks and will not have an opportunity to get to the PO before that. Alex | ||
| Velocity |
Alex, the regular S3 dash is the one. Let me know the total with shipping. 22601 is the zip and where/ how to pay. Scott | ||
| Velocity |
money sent for dash. | ||
| Prior |
Fender and dash will go out in tomorrow's mail. Sorry about the delay, been a crazy last few weeks. Last call on these parts for the next few months, will post what is left in the spring. Alex | ||
| Velocity |
got the dash. Thanks! Scott | ||
| Prior |
Good to hear, Scott. I'll be doing some pretty extensive work travel the next few months and will post whatever's left in the spring. Thanks! | ||
| Tbows3 |
I am looking for a shifter arm and linkage for a 01 S3. if you have one please let me know. |
