G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » Big, Bad & Dirty (Buell XB12X Ulysses Adventure Board) » Archive through May 06, 2010 » Archive through April 15, 2010 » Front Fork change / Muffler relocation « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Hunn
Posted on Thursday, April 15, 2010 - 12:49 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Has anybody tried to swap out the front fork on the Ulysses to a more offroad worthy upside -down fork to take advantage of an increased tire size and an more conventional brake set up ? Has anybody tried to relocate or change the under slung muffler setup to give the beast more ground clearance?
Took my Uly through some soft stuff and the 17 inch front tire is just awful. It gives absolutely no stability there and forget to get out of a rut with it. I do not intend to take my Uly off road racing, but I do run forest and fire roads with deep gravel and mud and encounter deep sand on the coast once in a while and that head shaking and wobbling is not confidence inspiring. My XT600 used to just fly over that stuff without a second thought, on the Ulysses I'm almost wetting myself.
Top of pagePrevious messageNext messageBottom of page Link to this message

Whisperstealth
Posted on Thursday, April 15, 2010 - 03:40 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

That's why I kept my KLR650. KTM is the better dirt bike, Uly the street machine. Kinda taking away part of it's soul me moving the muffler.
Top of pagePrevious messageNext messageBottom of page Link to this message

Bzrider
Posted on Thursday, April 15, 2010 - 08:29 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

never sit down the bike will shake its head in the loose stuff if you sit.we have lots of sand in florida even clay roads are sandy in spots its amazing the difference in handling
Top of pagePrevious messageNext messageBottom of page Link to this message

Pso
Posted on Thursday, April 15, 2010 - 08:47 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I was on a dirt road two weeks ago, ran into deep sandy stuff and front end washed out immediatly. didn't even have a chance to enjoy the fall just happened so fast. does well on hard pack and gravel, but sand not for me.
Top of pagePrevious messageNext messageBottom of page Link to this message

Ratbuell
Posted on Thursday, April 15, 2010 - 08:56 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Leave the muffler, it's a great skidplate.
Top of pagePrevious messageNext messageBottom of page Link to this message

Hughlysses
Posted on Thursday, April 15, 2010 - 09:25 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

The 17 inch front wheel is definitely NOT confidence inspiring in sand. I once rode through about 1-1/2 miles of loose river sand (at the end of an otherwise hard-packed dirt road) and I was having sphincter cramps by the time I got back to pavement. Bzrider- I'll try your advice if I get in that situation again.

Hunn- I'm sure you can improve the handling in the loose stuff with a larger diameter front wheel, but it seems you're going to compromise the Uly's prowess in the twisties by a similar amount. If that's what you want- go for it. I don't want to give up any of my Uly's pavement abilities.
Top of pagePrevious messageNext messageBottom of page Link to this message

Natexlh1000
Posted on Thursday, April 15, 2010 - 10:42 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

BTW, The forks are already "inverted".
also known as "male slider"
Top of pagePrevious messageNext messageBottom of page Link to this message

Ejc
Posted on Thursday, April 15, 2010 - 11:10 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

How about lowering tire pressure for off road?
Top of pagePrevious messageNext messageBottom of page Link to this message

Terrible1one3
Posted on Thursday, April 15, 2010 - 12:01 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Probably would be cheaper and easier to just get a used KLR650 for days like that.
Top of pagePrevious messageNext messageBottom of page Link to this message

Natexlh1000
Posted on Thursday, April 15, 2010 - 12:07 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

If you're getting a separate bike for the heavy stuff, I would suggest something 250-450cc

I used to blast through sandpits all the time on my 1989 KLR250. Drove it on the highway at its top speed all the time too.
I beat on that thing like an inflatable clown punching bag!
Top of pagePrevious messageNext messageBottom of page Link to this message

Bzrider
Posted on Thursday, April 15, 2010 - 12:23 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

you really have to counter balance,seer only with your feet.i have seen guys on klr650 have problems in loose stuff .big bikes have to have body english put in loose on he bars weieght the inside peg to start a turn then counterbalance to the outside peg if the bike washes out your not balanced .duell sport rider.com has a video that helps a bunch on technique
Top of pagePrevious messageNext messageBottom of page Link to this message

Uly_dude
Posted on Thursday, April 15, 2010 - 12:43 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I like the way you think Hunn. What you need up front is a skinnier tire. I've driven light weight KTM motard bikes in the sand with the same results. Those fat slicks just don't cut it. A thinner tire with deeper, aggressive thread would work wonders. And some of those aren't too bad on the twisties either(not race quality, but not bad). The forks are actually nice units, comparable to some dirt bikes.
The exhaust is something I'd been pondering to. I figure a straight pipe from the collector back, then get it around the swingarm somehow to a muffler. Or if you really had the bucks, custom build your own headers to sweep the pipes up and back - maybe. Not alot of room to get through the midsection though and the heat would get even worse. Hey, it's fun to daydream.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration