G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » Big, Bad & Dirty (Buell XB12X Ulysses Adventure Board) » BB&D Archives » Archive through December 12, 2009 » Home-made lowers « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Metaldude
Posted on Sunday, November 29, 2009 - 10:40 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I finished my home-made lowers project. Trying to make something like the Memphis Shades product at a lower price, in black color and in a shape that I thought matched the look of the bike better.

It was a bit of work. The worst was when I scratched the polycarbonate only to spend the next day sanding and buffing - only to still have a "smoky" look. But all told, the job was about $40 including tools and sandpaper.

I started with a 12" x 12" sheet of black Delrin from http://www.plasticsintl.com/ They're a local firm for me but also take internet orders. I got .250 thickness which was way overboard. You could probably do fine with .187 thickness.

To make the professional looking beveled edge, I bought this tool from Sky Geek http://www.skygeek.com/ats-ces01.html

The brackets I made from aluminum stock from Home Depot. Very easy to cut, bend and drill.

I took it on a 120 mile trip yesterday. At 60mph, wind noise is almost non-existant. But at 75-80mph, the benefit is much more pronounced. I used to hate cruising at those speeds as the noise in my helmet was very bad. Now, it's quite tollerable. I can't wait to take some long trips in the spring!
Top of pagePrevious messageNext messageBottom of page Link to this message

Metaldude
Posted on Sunday, November 29, 2009 - 10:46 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)


Final Product
Top of pagePrevious messageNext messageBottom of page Link to this message

Metaldude
Posted on Sunday, November 29, 2009 - 10:47 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)


Close up
Top of pagePrevious messageNext messageBottom of page Link to this message

Metaldude
Posted on Sunday, November 29, 2009 - 10:48 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)


Close up of the brackets


I was bumbed about the scratches. Maybe another winter project to sand them out.
Top of pagePrevious messageNext messageBottom of page Link to this message

Bobbuell1961
Posted on Sunday, November 29, 2009 - 10:58 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Very nice!
Top of pagePrevious messageNext messageBottom of page Link to this message

Mnrider
Posted on Sunday, November 29, 2009 - 11:13 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Dude-Sweet!
Top of pagePrevious messageNext messageBottom of page Link to this message

7873jake
Posted on Sunday, November 29, 2009 - 11:14 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

+1 on the 'nice'!

The flat bar stock brackets allow for some angle adjustment, yes? You can tuck them in a little or tilt them out a tad to adjust for wind flow?
Top of pagePrevious messageNext messageBottom of page Link to this message

Metaldude
Posted on Sunday, November 29, 2009 - 11:17 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Correct, they'd be easy to tilt back at a slight angle to make it look less boxy. Or for completely functional reasons like adjusting the air flow. I went rather conservative by setting them at 90 degrees at first as there's no way they'll collide with the left side scoop. But I might tilt them back a bit more to see how I like it.
Top of pagePrevious messageNext messageBottom of page Link to this message

Sperz1
Posted on Sunday, November 29, 2009 - 11:46 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Give us a report on how it affects buffeting if ya get a chance.
Top of pagePrevious messageNext messageBottom of page Link to this message

Eulysses
Posted on Monday, November 30, 2009 - 02:43 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Very nice Metaldude. I was staring at my little kit of Lexan and radiator clamps the other day (which led me to order the Memphis Shades) and I was thinking about just tucking the 8th inch lexan under the fly screen screws and cut out a notch for the signal light. That occur to you (sorry to bring it up at this point if you did not) I know you have some thick stuff there so would not be too good under the flyscreen. Nice job. All done and no buffeting anymore!
Top of pagePrevious messageNext messageBottom of page Link to this message

Metaldude
Posted on Monday, November 30, 2009 - 09:16 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Eulysses, I had the same thoughts as you about just putting some clear polycarbonate under the fly screen. That approach would have been very quick and painless. But aesthetically, I didn't like the clear look. I wanted it to be solid black to match the rest of the bike. Same reason why I waffled on the Memphis shades - I couldn't find them in solid black.

The wind noise is greatly reduced in my helmet at 70-80mph, which is what I was obsessed at reducing. I still get blasted at shoulder and arm level but that's OK by me. In warmer weather, it will be appreciated.
Top of pagePrevious messageNext messageBottom of page Link to this message

Crackhead
Posted on Monday, November 30, 2009 - 11:05 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

looks like a spitting lizard. like the Gieco temp form the commercial.

http://farm1.static.flickr.com/179/363977518_e3743 336e7.jpg


how do you link to pictures on this board?

(Message edited by crackhead on November 30, 2009)
Top of pagePrevious messageNext messageBottom of page Link to this message

Neurorider
Posted on Monday, November 30, 2009 - 01:35 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Metaldude, nice job! I've been thinking of doing exactly what you did. I'm glad to hear it works! Here's something I use that you might find useful:
http://www.novuspolish.com/
works great.
doc
Top of pagePrevious messageNext messageBottom of page Link to this message

Eulysses
Posted on Monday, November 30, 2009 - 05:30 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Crackhead...matching the color would help...just a bigger fairing. Our faster orange would be tough...paint the backside of the clear with Testor Grabber Orange might be a way.
Top of pagePrevious messageNext messageBottom of page Link to this message

Crackhead
Posted on Monday, November 30, 2009 - 07:28 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

i like the look, it make the Uly look even more serious about being pratical
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration