Author |
Message |
Ratbuell
| Posted on Friday, July 10, 2009 - 04:54 pm: |
|
That's Inner Diameter... Looking for a spec, so I can make an adaptor tube. I have a pair of work stands for my tuber rear axles, that pin/slide right into the axle and hold the bikes steady to work on. Until I can get a pair of spools mounted to my Uly's swingarm...I was thinking of making a bar that will fit in the Uly axle, and be drilled to match the tuber axles, so I could use my tuber stands. |
Etennuly
| Posted on Friday, July 10, 2009 - 05:00 pm: |
|
It measures 3/4". I would think you would want to go a little smaller for ease of sliding in and out. |
|