Author |
Message |
Ustorque
| Posted on Tuesday, August 07, 2007 - 03:26 pm: |
|
so now that ive done pipe, ecm, and k&n filter im sure my '06 cityx is lookin for more air i was gonna do a little inner airbox mod to aid in this anything i should look out for.....could i introduce to much air? thanks to all |
Glitch
| Posted on Tuesday, August 07, 2007 - 06:28 pm: |
|
Nah, it's probably right at it's peak with that set up. |
Ft_bstrd
| Posted on Tuesday, August 07, 2007 - 06:59 pm: |
|
I would buy the 07 airbox and try it. If you don't like the results, you can sell it here. Someone will want it. |
Slamber777
| Posted on Tuesday, August 07, 2007 - 07:25 pm: |
|
+1 to Ft_bstrd There were a lot of testimonials on previous threads stating the 07 air box cover made a difference. More openings seems to makes sense. l have all the mods you listed and the 07 air box cover. The thing is definitely quicker then before. The cover was less than $40, BTW. P/N P0215.3AA Good luck. |
Mr_gto
| Posted on Tuesday, August 07, 2007 - 07:30 pm: |
|
Or you can do it yourself w/ the dremel tool |
Ft_bstrd
| Posted on Tuesday, August 07, 2007 - 07:46 pm: |
|
Yep, Mr. Goat, but it's a bitch adding those pieces back in if you don't like the result. |
Mr_gto
| Posted on Tuesday, August 07, 2007 - 08:25 pm: |
|
Its not hard to find factory replacements if you dont like. |
Punkid8888
| Posted on Tuesday, August 07, 2007 - 09:47 pm: |
|
Personally I like the Dremel. I think the hole saw is a bit tacky. I took some idea from the 07 air box and spent the better half of a friday night into saturday morning doing this
The end result was a much louder intake and maybe a bit smoother in low rpm. I like it, and the fact that its visible through the outer airbox cover is a big plus |
Mr_gto
| Posted on Wednesday, August 08, 2007 - 01:05 am: |
|
Thats almost identical to what i did. I love the way it sounds when you gas it! |
Strato9r
| Posted on Saturday, August 11, 2007 - 04:17 am: |
|
Did about the same on my 03 9r's setup. It is louder, in a real good way, and it seems to pull harder as well. |
Comeauzee
| Posted on Saturday, August 11, 2007 - 08:56 am: |
|
I did mine yesterday on my 06 9sx and what a difference in sound and it feels like it's got a little more bottom end. Can't wait to get my drummer and race ECM this winter to finisher her off. |
Fmaxwell
| Posted on Saturday, August 11, 2007 - 09:48 am: |
|
I put the '07 airbox (from American Sportbike) and an '07 ECM (which I scored for $1 + $5 shipping on ebay ;) on my '06 XB12Ss. The bike definitely runs better and there's not a lot of intake noise. I understand that Buell worked hard to get airflow up without increased intake noise, so if you want to keep the quieter factory tone, pop over to American Sportbike and order the '07 cover. If you want the extra noise, get a Dremel and go wild. |
Starter
| Posted on Sunday, August 12, 2007 - 07:03 pm: |
|
You guys are hard of hearing if you think there is no difference in intake roar from one of these bikes with an open airbox, even the factory versions. |
Ft_bstrd
| Posted on Sunday, August 12, 2007 - 07:08 pm: |
|
I agree Starter. The intake honk is MUCH louder! I like it. The howl from the intake matches the howl inside my helmet! |