Author |
Message |
Charger22
| Posted on Monday, June 06, 2016 - 08:54 am: |
|
Velociraptor, new metzler m3 tires, primary chain tightened, clutch adjust new taillight and a lot of cleaning. |
Hootowl
| Posted on Monday, June 06, 2016 - 09:27 am: |
|
Check your belt tension? Looks tight. |
Littlebuggles
| Posted on Tuesday, June 07, 2016 - 06:34 am: |
|
Looks good, frame looks like its got texture black sprayed on? I dig it! Belt tightness for safe final drive bearings is generally referred to as "Scary Loose". (Which, incidentally, is much less scary than the girl I dated who fit the same description) |
Charger22
| Posted on Tuesday, June 07, 2016 - 06:45 am: |
|
I was looking into the belt tension. Seems a little tight but I can with no effort make the belt touch the swing arm on top. Yes there is a textured black. Too bad when someone did it they didn't care about the over spray. Took me a while to clean that up..... |
Brother_in_buells
| Posted on Tuesday, June 07, 2016 - 03:48 pm: |
|
Good looking bike! |
X1bully
| Posted on Thursday, June 09, 2016 - 07:02 pm: |
|
Velociraptor looks nice!! Gotta order mine today! |
Charger22
| Posted on Friday, June 10, 2016 - 12:25 am: |
|
Need to look into the carbon tank trims and tail pan and maybe the gauge cluster. Think it will be a nice touch. Then led light the rest of the way around. Also this was a carb conversion. Runs well. |
Mmmi_grad
| Posted on Friday, August 26, 2016 - 10:35 am: |
|
Your decal looks better on Black. All the other color bikes had a diff decal. Thanks for post. (Message edited by mmmi_grad on August 26, 2016) |
Charger22
| Posted on Friday, August 26, 2016 - 11:23 am: |
|
No problem, I switched to a Mukuni hsr in the last few weeks, works performance shock is arriving today. And just had a local HD dealership throw a huge list of parts through the primary and trans as well as a new stator and rotor. |
Charger22
| Posted on Sunday, September 25, 2016 - 06:33 am: |
|
Update: Back in the shop getting top end rebuilt. A hole in the rear piston and shot rings both front and back. Don't know how long things were running this lean. So over all a poor financial investment but this bike should be square and "like new" after this. It will be a long three week wait then I will break in the motor and have them preform a dyno tune. |
Ducxl
| Posted on Sunday, September 25, 2016 - 07:29 am: |
|
Here's a proper X1.1999 BONE stock,24k miles.Dismantled a few times but solid.Penske suspension
|
Charger22
| Posted on Monday, September 26, 2016 - 02:12 pm: |
|
Very nice example. But I for one am not I love with the side panels and how much of the motor they cover. |
Hootowl
| Posted on Monday, September 26, 2016 - 02:16 pm: |
|
'Bone stock'' Is that a 2001+ shifter I see there? |
Charger22
| Posted on Monday, September 26, 2016 - 02:35 pm: |
|
Haha. Thought the same thing. Fine bike it is though. |