G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Jefc73 Posted on Saturday, August 09, 2014 - 05:24 pm:        Got her this morning and cleaned her up a bit and made the dreaded things to get or needed list.   Jefc73 Posted on Saturday, August 09, 2014 - 05:24 pm:          Jefc73 Posted on Saturday, August 09, 2014 - 05:27 pm:          Jefc73 Posted on Saturday, August 09, 2014 - 05:29 pm:          Lynrd Posted on Saturday, August 09, 2014 - 08:11 pm:        Approved!   Two_seasons Posted on Saturday, August 09, 2014 - 08:27 pm:        List... Penske shock improved seat boomerang delete sidestand mod ...for starters of course   Dave Posted on Sunday, August 10, 2014 - 08:13 am:        Nice DAve   Jefc73 Posted on Sunday, August 10, 2014 - 08:38 am:        Steve,yes got new tires coming, Jolly side plates sitting in living room along with all three isolators and billet front motor mount. New rear brake pads and have a back up rotor off my S1W to go on. XB rocker box conversion with catch can. Also have a rebuild kit for the CV40 carb. Or I have an extra HSR42 that I have a rebuild kit for that I may try. Bike has Thunderstorm heads, pistons, Andrews cams and screamin eagle ignition. Have all the paperwork of what has been done to the bike, what has been fixed or replaced and Iam the third owner. Only 9000 miles. 83 HP. Also has a killer paint job with custom white stripe that is pinstriped with black.   Jefc73 Posted on Sunday, August 10, 2014 - 09:04 am:          Jefc73 Posted on Sunday, August 10, 2014 - 09:12 am:          Brother_in_buells Posted on Sunday, August 10, 2014 - 10:11 am:        Looking nice ,   Blks1l Posted on Sunday, August 10, 2014 - 10:47 am:        That is nice!   Phelan Posted on Sunday, August 10, 2014 - 11:52 am:        Very nice Jeff! The bike looks sick! Motor build sounds identical to mine. I have the same top end, cams, ignition on mine with nearly identical power (84 HP).   Jefc73 Posted on Sunday, August 10, 2014 - 02:44 pm:        Thanks Ross. Its actually 83.8 HP and 76.0 on Torque so right on par. Thought about doing a 1250 this winter with ported XL heads etc (don't want to mess up the Thunderstorm heads)and a Mikuni flatslide. Probably have Dan hook me up.   Phelan Posted on Sunday, August 10, 2014 - 03:06 pm:        Nice! I hear ya. I'm planning a 1250 kit and ported XB heads with big valves, among other things this winter .   K12pilot Posted on Sunday, August 10, 2014 - 11:06 pm:        Very nice )) Love the color Welcome to the madness ) Ride safe Chris   Rex Posted on Monday, August 11, 2014 - 10:25 pm:        nice   Essmjay Posted on Tuesday, August 12, 2014 - 10:18 am:        There is no turning back. Great looking bike.   Bikerrides Posted on Wednesday, August 13, 2014 - 05:57 am:        Looks like a great bike. Congrats! And it is a sickness.   Dave Posted on Wednesday, August 13, 2014 - 08:35 pm:        Are those XB turn signal lights? DAve   Jefc73 Posted on Wednesday, August 13, 2014 - 09:12 pm:        Not sure Dave. I believe they are X1 turns though.   Phelan Posted on Wednesday, August 13, 2014 - 09:15 pm:        Sure looks like they are .   Jolly Posted on Thursday, August 14, 2014 - 11:24 pm:        Looks really great!! Bring your box of parts and let's get it finished !!!! Then we'll go ride skyline drive!!! See ya next weekend!!!   Jefc73 Posted on Thursday, August 21, 2014 - 09:43 am:        Rocker box conversion finished and catch can installed. Rear brakes and rotor done as well. Front rotor coming today. White Marchesinis should be here shortly as well for a differant look. Tires to be mounted shortly as well. Michelin pilots. All three isolators will be changed out too as well as the front mount. Coming along nicely. Bike rides nice and smooth.   Jefc73 Posted on Wednesday, August 27, 2014 - 09:46 pm:        Fixed the oil leak at the oil tank. Guy I bought the bike from was using an o ring around the drain plug. I took it off which by the way it was split and put the stock thin aluminum washer on. Tightened up and no leaks. I did use just a little yamabond 4 under the head of the bolt as well. All good. Adjusted the clutch today behind the derby cover and along the cable. The cam chain needed tightened a little as well. Changed the trans fluid too. Put the formula + in. Bike seemed to shift and ride smoother. Front 9 pin rotor on. Will be taking bike to Jolly's place next weekend to do all three isolators. Will have new pilots on for the trip as well. Looking forward to riding. The S2 is an awesome bike. Not as much power as my S1W but so smooth and damn does it get the looks.   Ratbuell Posted on Thursday, August 28, 2014 - 07:31 am:        ...once I get my right rear turn signal reattached (or replaced), the three of us should get together for an S2 ride...   Jefc73 Posted on Thursday, August 28, 2014 - 07:55 am:        For sure Joe. Would like to get a good look at your red S2. I will be out there from sept 4th evening to sept 8th morning. KCzombie is also coming out.   Jolly Posted on Thursday, August 28, 2014 - 09:37 am:        Joe, one of the rides I'm thinking about doing is running back roads to Harpers Ferry probably Saturday 6 Sep, so if you are free we could meet up. It will be Jefc73, KCZombie and myself. were going to install side plates and ISOs on Jeff's bike then spend two days doing some riding.   Ratbuell Posted on Thursday, August 28, 2014 - 10:23 am:        Sounds good. I have a gig the night of the 5th so nothing too early on the 6th for me lol...but I'm game. I may have an xb signal on it...but I'll ride   Jolly Posted on Thursday, August 28, 2014 - 10:47 am:        It will take us a few hours to get there from where I live with a few stops along the way, so it will be lunch time or later by the time we make it. Bring the RED S2!! Would love to see that bike!! is your phone number still the same?