| Author | Message | ||
     Jeffb |
I have decided to part out this bike. I just rebuilt the top end with new Wiseco +.010 pistons. The engine runs great. The bike has a custom paint job, chrome extras, PM wheels, etc. Tires are junk. Complete engine - $1500 Forks & trees - $250 PM Wheels with rotors - $350 Bags with narrow lids - $200 Bodywork - $250 baileyj76@hotmail.com 608-606-9674 All the other parts, let me know what you need       | ||
| Brentx1 |
Is that a pace car in the back round? Sweet! | ||
| Jolly |
I may need the motor...for an S2..will it bolt right in or is the tie bar spacing different for an s3 to an s2? I cant remember but for your year is the bike carb or fuelie? I'm building an S2 and I found JB WELD on the case and it leaks....not sure if its a save or a pull it and stick it in the corner and trip over it for a while... | ||
| Basti |
Hi very interested in the complete exhaust system.Pm for you on the way | ||
| Steveford |
The motor will work with your S2 tiebars but you'll need the S3 front isolator mount. Do I get a commission? | ||
| Blownharley |
Can you separate the transmission? | ||
| Buelljunkie |
Interested in the bags & the forks/trees. PM sent, thanks. | ||
| Jeffb |
Jolly has dibs on the engine for now. If he doesn't take the engine, I will separate the transmission. It is a pacecar. I have had it since 1993! Good old car. | ||
| Lynrd |
You could also drill out the holes on the S2 mount. I think the S2 mount is better than the S3 because of the webbing between the cylinder head holes...  | ||
| Brentx1 |
I'm interested in the swingarm and swingarm mounting block. Is it still available? | ||
| Ten4 |
have an 2000 M2 with a shot front drive pulley!!! would love to replace with a 29t but will settle for the 27t that came off of it... it'd be a whole lot cooler if yours would fit and i could save a lil! | ||
| Jeffb |
Ten4, If Jolly takes the engine, the sprocket is going with it. If he doesn't take it, the sprocket will be available. I should know by the middle of the week if he is taking the engine. | ||
| Ten4 |
thanks jeffb | ||
| Gtagrip |
Would be interested in the clock | ||
| Jeffb |
The engine is gone. I sent a PM about the clock. Make me on offer on anything else. | ||
| Lornce |
PM sent.  | ||
| Jeffb |
I still have lots of parts. Bodywork, fairing mount, forks, brakes, etc. No engine or wheels. I am going to start listing parts on Ebay next week, but would rather sell them here. Let me know what you need. baileyj76@hotmail.com | ||
| Jeffb |
Update Still have some parts left.. I want to clean up what's left. I have pictures of all of this, but am too lazy to resize and post! tach - $20 Speedo - $20 clock - $20 forks - 100 trees - 100 Wiring harness - $50 Fairing mount $100 headlight - $10 Foot pegs - $20 coil, brake calipers, dash, key lock, seat latch, bars, other little parts. Let me know what you need. baileyj76@hotmail.com | ||
| Bosephus |
I will take the clock let me know payment info. Thanks | ||
| Basti |
Hi I may be interestes in the dash complete with tach and Speedo and if still available the clock Thanks | ||
| Bosephus |
If Basti wants the complete dash I will withdraw on the clock. | ||
| Arizona_buell |
I will take the headlight off your hands if it has all the screws with it. please and thank you :-) shipping to 85225. Total with shipping and I will promptly PayPal you. Mark | ||
| Buckley |
If still available, I would be interested in the foot pegs. | ||
| Harley88 |
If all else fails, I need a clock too! | ||
| Captains1 |
Interested in forcewinder | ||
| Jeffb |
I sent PM's to those who responded. Captains1, the forcewinder is gone. | ||
| Arizona_buell |
must have ended up in my bulk folder , didn't see a reply for the headlight. Still want it. :-) | ||
| Jeffb |
Key switch and tank hold down "teeth" are gone | ||
| Arizona_buell |
money sent for headlight | ||
| Bikerrides |
Are the bags still available? I know someone who is looking for a set. |
