Author |
Message |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Koz5150
| Posted on Tuesday, July 30, 2013 - 10:10 am: |
|
This has been one of those lingering projects that I never quite could get around to doing... Until now. So the idea is that I wanted to reduce the gearing on the bike since I never use 5th gear. I like to cruise on my 2002 M2 between 3,500 and 4,000 rpm. On the highway that means I am in 4th. I had a 26 tooth sprocket up front for awhile and that was better, but it was aluminium and it eventually wore out. So I found this cool looking Big Dog leftover that I picked up for $50. I had the center hole widend (local shop, $40) to fit my rim and am mounting it backwards for both spoke alignment and backspacing. I do need to add a 1/8" spacer to get the backspacing correct ($9.95 from Drag Specialties). As soon as the spacer comes in I will put it all back together. (Message edited by koz5150 on July 30, 2013) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Koz5150
| Posted on Tuesday, July 30, 2013 - 10:12 am: |
|
![1](http://www.badweatherbikers.com/buell/messages/47623/717968.jpg)
![2](http://www.badweatherbikers.com/buell/messages/47623/717969.jpg)
![3](http://www.badweatherbikers.com/buell/messages/47623/717970.jpg)
|
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Koz5150
| Posted on Tuesday, July 30, 2013 - 10:18 am: |
|
You can see the size difference moving from 61 to 70 teeth. Based on the adjustment in the swingarm it should be able to handle the change. If not, I did pick up a belt that is slightly longer but would prefer not to have to change to it. (Message edited by koz5150 on July 30, 2013) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Jramsey
| Posted on Tuesday, July 30, 2013 - 11:17 am: |
|
where did you find a 65 tooth pulley,oem has 61 teeth. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Jayvee
| Posted on Tuesday, July 30, 2013 - 11:55 am: |
|
'Euro-sprocket' ? |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Buellistic
| Posted on Tuesday, July 30, 2013 - 12:38 pm: |
|
"AND", what about the speedometer SENSOR ??? |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Koz5150
| Posted on Tuesday, July 30, 2013 - 12:41 pm: |
|
Sorry, I meant 61 on the stock pully and stepping up to a 70 tooth. The pulley was a spare part made for a Big Dog motorcyle before they went out of business. (Message edited by koz5150 on July 30, 2013) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Koz5150
| Posted on Tuesday, July 30, 2013 - 12:42 pm: |
|
The speedo sensor is not a big deal. I am replacing my speedo with a GPS unit in the dash. I rarely use it anyway, I look at the tach and just flow with traffic. |
|