G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Ebutch Posted on Friday, September 17, 2010 - 11:58 pm:        Belt cogs are getting thin,I have a good replacement.Rear pulley cogs showing a lot of wear,have good replacement!!!front pulley and belt and rear pulley have112,000 miles on them.But as I see it I think I can use front Pulley again with newer belt and newer rear pulley.What do you Guys Think?This is on my 1996 S2T with total mileage of 132,000 miles.Hope I don,t need to buy front pulley,(trans-out-put-pulley)???   Ratbuell Posted on Saturday, September 18, 2010 - 12:51 am:        Trans pulley is steel, wheel pulley is aluminum - if I recall correctly. Front one should last a lot longer...unless you're seeing cracking or goofy wear patterns, leave it on there and go another 132k!   Fuzzz Posted on Saturday, September 18, 2010 - 10:39 am:        With that many miles, I'd at least inspect th inside of the front pulley at the same time.... http://www.badweatherbikers.com/buell/messages/476 23/591601.html?1283518506 and then adjust belt appropriately http://www.badweatherbikers.com/buell/messages/476 23/593399.html?1284462840   Ebutch Posted on Saturday, September 18, 2010 - 07:46 pm:        Thanks Joe That,s What I wanted To Hear!!Neal that Happened to me at 22,000 miles and 25,000 bad Steel on primary sprocket spline stripped out and Scary loose is Right tension on Belt!!! (Message edited by ebutch on September 18, 2010)

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: