| Author | Message | ||
     Maru |
Can someone please post a picture of a mounted Buell Pro Series exhaust rear mount? | ||
| Ratbuell |
I have to go to the garage to get a pic, but if you're talking about the rear of the muffler, it's a pair of flat metal plates, about 2.5" long, with a hole at each end. They go from the tabs on the muffler, to the tabs on the bottom of the engine case. 4 bolts, because they're offset. | ||
| Maru |
Hi Joe. This exhaust came with 2 round stainless bands that go around the rear of the exhaust with tabbs for additional something. It has no welded on rear mount. Presumably, the 2 metal plates you are talking about are the same as the two plates for the stock exhaust and they bolt to these two straps? | ||
| Whitex102 |
Pictures of my X1's Mount.  | ||
| Whitex102 |
Another  Hope these Help. | ||
| Maru |
Very helpful whitex, it looks like I need the stock Z mount or whatever it is called. Neither of my bikes have these as both had Vance and Hines exhaust when i bought them. Thanks guys. |
