G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Squidravioli Posted on Friday, March 18, 2011 - 09:23 am:        I am getting some spewage from my primary vent hose that runs up my tail section on my 00 X1. I have scoured the forum and it seems that a common issue is the crank seal. I am hoping to be able to replace the crankseal soon. I would also like to put a catch can on the end of that hose. How do I make one?   Jramsey Posted on Friday, March 18, 2011 - 10:27 am:        The spewage will cease once the crank seal is replaced. If your worried about it put a small fuel filter on the end of the vent hose.   Squidravioli Posted on Friday, March 18, 2011 - 10:58 am:        Thanks, do you know what size diameter that hose is?   Jramsey Posted on Friday, March 18, 2011 - 12:52 pm:        3/8" ID.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: