G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » XBoard » Buell XBoard Archives » Archive through March 17, 2008 » Helmet Holders « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Firebolt32
Posted on Sunday, March 09, 2008 - 06:39 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Don't know about the rest of you XBers, but I haven't been able to find a secure place to store my helmet at bike events. I usually just hang it from the blinker. I finally nutted up and asked a guy with a GSR how the hell his is hang from under the "bitch pad". There were hook molded into the plastic. Mine doesn't have this. I got home today and took some sturdy threaded hooks and installed them just about a 1/4 of the way from the back side of the pad into the hard plastic. Works like a champ. I wouldn't recommend doing 90 mph for I haven't tested this and don't plan on it. Helmets are expensive. But for simply storage it's great.
Top of pagePrevious messageNext messageBottom of page Link to this message

Clutchless
Posted on Sunday, March 09, 2008 - 07:38 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Yea, most of metric sportbikes have a hook or latch somewhere under their tail.

They sometimes put it on the passenger footpeg and latch it to that hook for secure 150 mph + runs on the expressway.

never understood that cause your head isnt in the helmet down there, but its great for lockin it up on the bike at events or parking cause some have intergrated a lock and key hole.
Top of pagePrevious messageNext messageBottom of page Link to this message

Rflives
Posted on Sunday, March 09, 2008 - 07:54 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I just take the d ring on the helmet strap and stick it over the seat latch post wile the seat is of then put it back on
Top of pagePrevious messageNext messageBottom of page Link to this message

Dennista15
Posted on Sunday, March 09, 2008 - 07:54 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Believe it or not, the little cable thingy that came with our bikes is supposed to secure our helmets when they're not on our head. Thankfully Badwebers are as innovative as our bikes.

http://www.badweatherbikers.com/buell/messages/327 77/285648.html

There's some more in the search section
Top of pagePrevious messageNext messageBottom of page Link to this message

Firebolt32
Posted on Sunday, March 09, 2008 - 08:02 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

These days you have to be innovative. If not you'll go broke. Looking back at my original post, my grammar was terrible.
Top of pagePrevious messageNext messageBottom of page Link to this message

Nillaice
Posted on Sunday, March 09, 2008 - 08:10 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

i drilled and tapped a hole in the square tubing of the tail, and it holds the d-rings securely under the passenger seat.
Top of pagePrevious messageNext messageBottom of page Link to this message

Firebolt32
Posted on Sunday, March 09, 2008 - 08:14 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Thats even better. I'm stealing it.
Top of pagePrevious messageNext messageBottom of page Link to this message

Badlionsfan
Posted on Sunday, March 09, 2008 - 11:11 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

i have one of these
http://www.jpcycles.com/productgroup.aspx?GID=72B9 B462-3BA4-4CEC-9548-B14FC91EBE37&search=helmet+loc k&store=All&page=4

i'm modifying it soon, look for pics and such when i get my bike done.
Top of pagePrevious messageNext messageBottom of page Link to this message

Old_man
Posted on Sunday, March 09, 2008 - 11:26 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I have a small cable lock, sold for helmets, that I run through the D ring and under the bars at the center clamp on my S.
There should be some spot on the R that would work.
http://cgi.ebay.com/ebaymotors/2-HELMET-CABLE-LOCKS-RAMPS-OTHER-USES-BLUE_W0QQitemZ230189361867QQcmdZViewItem


(Message edited by old man on March 09, 2008)
Top of pagePrevious messageNext messageBottom of page Link to this message

Dynasport
Posted on Sunday, March 09, 2008 - 11:44 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I just run a small plastic covered chain I bought at Wal-Mart through the shield opening on my helmet. I then run the chain around my handlebar inside my brake and throttle lines. So, to get the helmet off they have to cut the chain or the brake and throttle lines. Doable, but a lot of trouble. So far so good. I have thought about those helmet locks that go on the license plate bracket. Twisted Throttle has them too.
Top of pagePrevious messageNext messageBottom of page Link to this message

Badlionsfan
Posted on Monday, March 10, 2008 - 12:10 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I have thought about those helmet locks that go on the license plate bracket.

it's probably the most funtcional thing i've bought for my bike, just don't really like the look that much. i've got a great idea on how to make it more stealth. stay tuned!
Top of pagePrevious messageNext messageBottom of page Link to this message

Firebolt32
Posted on Monday, March 10, 2008 - 10:03 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Well on my original post I stated that I used the threaded hooks under the passenger pad. After seeing Nillaice's post on taping the square framing inside the pocket there it made more sense to do that. Rather than having to hold the helmet while putting the pad back on with my first idea, I ran with Nill's and it works much better. These hooks are pretty sturdy and are extremely cheap at any hardware store. Try it.
Top of pagePrevious messageNext messageBottom of page Link to this message

Truk
Posted on Monday, March 10, 2008 - 03:40 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Get a small padlock (Hardware store)in which the diameter of the circular locking arm will fit thru one of the top holes in the passenger foot peg guard. Lock the helmets "d" ring to the passenger foot peg guard.

I pull the foot peg itself out and place the helmet over it and rest the helmet there. I use the footpeg on the opposite side of the kickstand. Make sure the helmet isn't touching anything hot.

When not in use, I leave this small padlock in my Buell rear tail bag, could fit under the rear seat too....works for me
Top of pagePrevious messageNext messageBottom of page Link to this message

Truk
Posted on Monday, March 10, 2008 - 03:43 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Oh yea...obviously not the thing to do when riding the bike, just for when you need to secure the helmet while parked....
Top of pagePrevious messageNext messageBottom of page Link to this message

Jaimec
Posted on Monday, March 10, 2008 - 05:39 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I used that license plate bracket thingy on my Cyclone, and that was a BIG mistake. The tail section on the Cyclone was really unsupported by anything other than fibreglass, the steel frame underneath ended almost a foot and a half forward from where the rear fender hung.

The extra weight of the license plate bracket and locks was enough to crack my tail section. The first was replaced under warranty, but the second time it started to crack I was outside of the warranty period. That's when I realized what was really going on.

I had to scrap the bracket, and I was able to use some nylon cloth and epoxy to reinforce and repair the cracking tail section before it went too far. Ever since then, I've been leery about those brackets.

I know the Lightning tailpiece is a pretty substantial piece of metal, but I'm gun shy...
Top of pagePrevious messageNext messageBottom of page Link to this message

Nillaice
Posted on Monday, March 10, 2008 - 06:23 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

thanks for the dap, Firebolt32.
my only tip is to tap the threads kindly, and gently as it is aluminum, and use some blue threadlock on the left side bolt if you do both. i figure the vibrations from the engine's rotation loosen that one, but will tighten the right side
Top of pagePrevious messageNext messageBottom of page Link to this message

Firebolt32
Posted on Monday, March 10, 2008 - 08:20 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I figured threadlock was needed. It was definitely genius bro.
Top of pagePrevious messageNext messageBottom of page Link to this message

Metalstorm
Posted on Wednesday, March 12, 2008 - 11:23 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I have one of those Helmet Guardians on my license plate.
It looks okay. It kinda blends in with the Ventura rack I have. It works very well.

There was a BadWeBer here who did a cool mod. He took the locks off the Helmet Guardian bracket and installed them onto the rear reflector brackets.
It looked very cool.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration