Author |
Message |
Pontlee77
| Posted on Tuesday, September 26, 2017 - 05:25 pm: |
|
I recall reading the XB rocker box cover uses ford PC valves, which models of ford do they como from, because here in Spain I think we have different fords but maybe there is a model that could have them, thanks. |
Hootowl
| Posted on Tuesday, September 26, 2017 - 05:30 pm: |
|
Not sure, but any PCV valve that fits in the hole, and under the air box will work. It's just a one way valve. |
Pontlee77
| Posted on Wednesday, October 04, 2017 - 05:11 pm: |
|
If I find PCV valves that are shorter than the ones from Harley will I get any problem ? Thanks |
Oopezoo
| Posted on Wednesday, October 04, 2017 - 06:34 pm: |
|
It should be fine. I had a XB valve with a crack down the side, so I opened it up. It is basically just a maze of chambers through the stem of the valve and then some packing and an umbrella valve. REALLY, REALLY simple design. I had actually considered an attempt at making a set out of ABS with my 3D printer. Still might do that, but its pretty far down the priority list. |
Oopezoo
| Posted on Wednesday, October 04, 2017 - 06:36 pm: |
|
Actually.....here is a ink to a pic with one of them cross sectioned. Not much going on there. Just need the right size diameter neck to seal against the grommet in the cover Vhttp://www.badweatherbikers.com/buell/messages/32 777/759622.html (Message edited by oopezoo on October 04, 2017) |
Pontlee77
| Posted on Wednesday, October 04, 2017 - 08:03 pm: |
|
Thanks |
|