| Author | Message | ||
     Pwnzor |
Anybody know where I can get a pair of these?  I've got a round headlight on my Z1000 and I have the same fairing shown in the picture. It fits perfectly around the headlight but I need some way to mount it. | ||
| Hybridmomentspass |
eagerly awaiting a reply on this as too | ||
| S1owner |
Only used on the 96-97 S1. Very rare. You could use an X1 mount it is the whole assembly use them and cut off what you need but it would all around be cheaper ans faster to just make them | ||
| Pwnzor |
Definitely rare... getting shot down everywhere I ask about it... So I guess it's fabrication time! | ||
| Court |
You might check some BMW catalogs around 1992 or so . . . if I recall . . . Dave Gess, if I recall, sourced the headlights from BMW. | ||
| S1owner |
Probably better to fabricate as the Buellers wouls appreciate the parts going on a Buell that needs them. | ||
| 1313 |
Only used on the 96-97 S1 I'm drawing a blank. What was done to the '98 S1 that made it not need these? They're indeed in my '98 S1/S1W parts book... 1313 | ||
| No_rice |
i can order a right hand one brand new, i can not however, order a left hand one brand new... | ||
| Brother_in_buells |
The 98's have the same brackets And the fairing brackets are not to difficult to make/copy. The x1's have the headlight and fairing bracket in one piece ,but are bent the same. | ||
| Oddalloy |
I made two templates of the brackets from my new-to-me S1 and sent them to Pwnzor. He has a little bit more work to do because he wants to fit the carbon screen to a Z1000. | ||
| Upthemaiden |
I've used those flyscreens on other bikes and just made the pieces out of thin aluminium from home depot. |
