G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Impala Posted on Tuesday, May 11, 2010 - 11:26 am:        D&D slip on muffler and elbow from my X1. Fits any tuber with the 2.5" outlet. Used 1 season. No dents. $200 Stock header from my X1 $20. Header is cracked by the O2 bung. Updated style shifter from 02 X1. Complete except mounting hardware. Small dent in bottom. Not bent or damaged otherwise $60   The4ork Posted on Tuesday, May 11, 2010 - 02:33 pm:        wil that muffler fit on a s1?   Nallac Posted on Tuesday, May 11, 2010 - 08:30 pm:        whats required in the way of mounting hardware for the shifter?. Could use it+your header..   Impala Posted on Wednesday, May 12, 2010 - 12:01 pm:        The long mounting bolt can be found at the hardware store. There is a metal bushing that you would have to fab, find at a hardware store or purchase from harley. There is also a plastic insert for the mount. If you were running the lower chin fairing there is an additional bushing you would need.   Kalali Posted on Wednesday, May 12, 2010 - 12:20 pm:        I think among all the required HW, the insert/sleeve piece that fits inside the lever pivot will be the hardest to find/fabricate mainly because it is a precision fit piece. Other pieces should be easier to find/make.   Brinnutz Posted on Wednesday, May 12, 2010 - 12:53 pm:        Al sells some iirc. Yup, sure does. http://www.americansportbike.com/shoponline/ccp0-p rodshow/5554.html

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: