Author |
Message |
Tod662
| Posted on Thursday, April 16, 2009 - 11:09 am: |
|
Have done everything by the manual to pull the primary chain and sprockets off. Engine nut is removed and clutch end is free. How do I use a puller to pull the engine sprocket off. The sprocket has 4 drilled nonthreaded holes. Unless if I am missing something obvious, how do you use a puller with no treads (on the sprocket) |
Gowindward
| Posted on Thursday, April 16, 2009 - 11:14 am: |
|
Pull it and the clutch basket together at the same time by hand. (I'm guessing the primary chain is still on) The magnets in the rotor have a hold on the stator which will make it feel like it is stuck. |
Tod662
| Posted on Thursday, April 16, 2009 - 11:20 am: |
|
so its not pressed on?, I tried a little with a bar and it will not budge. |
Jramsey
| Posted on Thursday, April 16, 2009 - 11:37 am: |
|
It's a snug spline fit, try prying lightly from opposite sides at the same time. |
Gowindward
| Posted on Thursday, April 16, 2009 - 11:47 am: |
|
Correct, not pressed on. |
Hootowl
| Posted on Thursday, April 16, 2009 - 12:21 pm: |
|
Like it says....do not hit it, you might knock the magnets off. They are glued on. |
Reepicheep
| Posted on Thursday, April 16, 2009 - 12:54 pm: |
|
Wrestling that thing off can be pretty entertaining... those magnets are STRONG! |
Tod662
| Posted on Thursday, April 16, 2009 - 02:11 pm: |
|
thanks guys on to the tranny. |
|