| Author | Message | ||
     Pdhockey31 |
Ok guys, this is my first post here, and i'm proud to finally join the buell community with my '97 M2. I have one issue though, the previous owner removed the bar-end mirrors and left me with the hollow 1" bars. Where can I get bar ends (not mirrors) to fill them? I have searched high and low to no avail... Thanks | ||
| Oldog |
First Welcome. Second check the sponsor area American Sport Bike http://www.americansportbike.com/ is a good starting point. Ride safe.. (Message edited by oldog on June 25, 2006) | ||
| Djkaplan |
I was surprised when they had these at the Harley dealership, but I got my last couple of bar end plugs at a bicycle shop. They were pretty cheap... less than a dollar for two. | ||
| Jayvee |
For about $8 you can find "anti-vibration" knurled anodized aluminum bar ends. I think they work, a little bit. | ||
| Firemanjim |
And your bars--if stock--will be 7/8".Only the S-2 came with 1" bars. So any of the aftermarket bar ends should work. | ||
| Pdhockey31 |
hey guys thanx for all the help, im learnin alot about my buell from this site... its quite a step up from my old honda hawk gt | ||
| Johnnylunchbox |
Hey pdhockey, I sent you a PM, just checking to see if you got it. | ||
| Pdhockey31 |
yes, i just received your PM, thanx, those are some serious bar-ends you sent me the link for! Thanks again guys, I'm looking forward to actually logging some miles here as soon as the monsoon over the Northeast subsides... | ||
| Cpres |
My M2 Has helmet locks in the bar ends, if you slide you coat over grip it is locked to bike by helmet. They came from barender.comhttp://www.barender.com/ |
