| Author | Message | ||
     Jester8609 |
backing up into a pole broke off my rear signal. It was blinking rapidly whan I went to plug it back in it stopped and now neither side works! I get nothing. No dash blinker lite of any blinker. Fuse is good. ideas anyone? Jeff}}}} (Message edited by jester8609 on November 13, 2006) | ||
| Lost_in_ohio |
Have you tried unplugging it again. Do you have a volt meter or a troubleshooting test lamp. | ||
| Ezblast |
Long story - dash cracked, so I exchanged it out with the spare I had, turned the key - dash lit up and numbers appeared. So today I go to work and the signals don't work, I blew the 15 amp system fuse - replaced - now none of my signals work - did I blow the flasher or just bad bulb? Usually if it is the bulb - the signals just flash faster - now though nothing and no sound from the flasher any more either. A little help please. Thank you. GT - JBOTDS! EZ  | ||
| Bomber |
my bet would be flasher -- ez enough to replace, and cheap, 2! i'd also guess there's a short/ground fault somewhere, causing the problem in the first place -- using commmon troubleshooting techniques, look at the last thing you touched (almost ALWAYS works for me!) | ||
| Ezblast |
Thank you! |
