G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » XBoard » Archive through November 05, 2012 » FUEL PUMP REBUILD/REPAIR OR FOR SALE??? « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Bisherpt
Posted on Wednesday, October 03, 2012 - 11:19 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Anyone have luck rebuilding or repairing Buell fuel pumps? Been messing with a. '04 XB12R that wouldn't run. Narrowed it down the the fuel pump. Only pushing 5psi and should be 49-51psi. New one is $360, don't want to trust ebay. Will be pulling it to make sure I have correct voltage, etc, etc.


Anyone have a XB12R they want to part with? (working of course...)
Top of pagePrevious messageNext messageBottom of page Link to this message

Rays
Posted on Wednesday, October 03, 2012 - 12:45 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Yes, I just replaced the pump in my '09 and many people have replaced XB pumps.
The exact replacement is a Walbro 521 - there are other equivalents (Airtex e2061, AC Delco EP274).
The only thing with the equivalents is they may not be exactly the same current draw as the Walbro 521 - it is quite a low volume pump. I found the AC Delco EP274 draws about 3 more amps over my original so I would think it has quite a bit more flow over the original and that is obviously just wasted with the pressure regulator set-up.
The pre-filter is a Buell part - P0806.K.
The inline filter is a Buell part - P0101.02A8 (or Autozone FF3330 I have seen mentioned).
The O-rings for the pump body are 3" x 3/32" Viton (Buell Part P0121.02A8).
Here is the link to my XT pump replacement over in the KV - there are many threads if you do a search.

http://www.badweatherbikers.com/buell/messages/384 2/694050.html?1348303934

The pressure regulator is also a Buell part should you get that far into it.
Top of pagePrevious messageNext messageBottom of page Link to this message

Wolfo68
Posted on Wednesday, October 03, 2012 - 02:57 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I have 3 working extras also if you need one. pm me for details on them
Top of pagePrevious messageNext messageBottom of page Link to this message

D_adams
Posted on Wednesday, October 03, 2012 - 02:57 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

So how much did it run you for parts?
Top of pagePrevious messageNext messageBottom of page Link to this message

Greg_e
Posted on Wednesday, October 03, 2012 - 09:19 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I made a post with a lot of details, the only parts I had to buy from a "Buell" parts store was the input strainer and the o rings. Autozone had the pump and post filter in stock but did not have an input strainer that would work. Total cost was around $140 and it works great with almost no noise.


Here are the part numbers:
E2061 pump and FF3330DL filter

The guys at Autozone laughed when I told them I needed a pump for a motorcycle, they didn't believe they had anything that would work until I gave them numbers and we started comparing the pieces. Mine has about 1000 miles on it now and seems to be working fine.

(Message edited by Greg_E on October 03, 2012)
Top of pagePrevious messageNext messageBottom of page Link to this message

Rays
Posted on Thursday, October 04, 2012 - 06:36 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Greg, would you be able to check the current that the e2061 draws during the couple of seconds prime please?
Top of pagePrevious messageNext messageBottom of page Link to this message

Greg_e
Posted on Thursday, October 04, 2012 - 04:48 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Not easily. I can tell you that my 9R charges at roughly 10 amps after I start the engine and that is with 130 watts of headlights running.
Top of pagePrevious messageNext messageBottom of page Link to this message

Bisherpt
Posted on Monday, October 22, 2012 - 11:41 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Back on two wheels!! Thanks to Wolfo68 for the pump. Saved me a ton and she works great.

Original pump issue I do believe is the pressure regulator. That little thing is a $100 part!!
Top of pagePrevious messageNext messageBottom of page Link to this message

Hughlysses
Posted on Monday, October 22, 2012 - 09:19 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

It sure would be good to have a separate section in the KV or elsewhere on Badweb for part substitutions like this. It won't be too many years down the road before we won't be able to buy the parts from HD and the more parts like this we can identify the better.
Top of pagePrevious messageNext messageBottom of page Link to this message

Panhead_dan
Posted on Monday, October 22, 2012 - 10:46 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I agree, Hughlysses. There's already quite a lot of info on the subject. It just needs to be organized and accessible.
Top of pagePrevious messageNext messageBottom of page Link to this message

Ducbsa
Posted on Tuesday, October 23, 2012 - 05:59 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

This has some info.http://www.buellxb.com/Buell-XB-Forum/General-Moto rcycle-Chat/Parts-cross-reference-thread
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration