G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Johnk3 Posted on Wednesday, July 20, 2005 - 06:10 pm:        so i get the JIMS tool drill out the broken exhaust stud and start tapping the hole. About half way done when the tap shatters in the stud hole I am tapping! So I ended up removing the rear head and drilling the tap out. I need to have the head welded now and completely retapped. Since head is off and the engine is rotated, can I pop the 1050 kit and stage 2/3 heads on it right now or do I have to completely strip the bike? Since I've gone this far, I might as well do the kit if it's not more disassembly....   Dale Posted on Wednesday, July 20, 2005 - 07:04 pm:        It is not that much harder to take the frame off of the motor. You do not take the motor out of the bike. You take the frame off of the motor.   Dale Posted on Wednesday, July 20, 2005 - 07:07 pm:        It is not that much harder to take the frame off of the motor. You do not take the motor out of the bike. You take the frame off of the motor.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: