G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   S3t Posted on Monday, January 02, 2012 - 03:59 pm:        I need a set of late model tuber TALL bars - anyone have?   Hogluvr Posted on Monday, January 02, 2012 - 04:05 pm:        I have these, supposed to be off an S3, dunno if these are what you're looking for or not, $20   Ratbuell Posted on Monday, January 02, 2012 - 08:07 pm:        The pic looks like them...but I believe Blast bars are the same as S3T bars in case the ones in the pic aren't right.   S3t Posted on Monday, January 02, 2012 - 08:11 pm:        Initial take is that they look right....I'm REALLY interested... can u take a few measurements? Rise Width knurling - length, spacing, overall thanks, dennis   Hogluvr Posted on Monday, January 02, 2012 - 08:43 pm:        Rise = 6" Width = 26-1/2" Knurling: length = 1-1/4", spacing = 2", overall = 4-1/2" Measurements taken with a Dollar Tree tape measure so they might be a smidge off. Hope this helps. Mike   S3t Posted on Tuesday, January 03, 2012 - 06:25 am:        I'll take them...... U R in Berea???? - I'll be in Brunswick late this week, or the very first of next week.   Jayvee Posted on Tuesday, January 03, 2012 - 06:23 pm:        Blast and S3T bars are slightly different, but interchangeable. Have one of each, they're bent just slightly different.   S3t Posted on Wednesday, January 04, 2012 - 06:38 am:        Definitely I do not want Blast bars. I have an S3T and those are what I'm looking for.   Jayvee Posted on Wednesday, January 04, 2012 - 11:30 am:        This site has both for sale: http://www.latus-harley-davidson.com/HANDLEBAR-S3T .htm Notice the S3T shows N0002.E while the Blast is N0002.M That sounds about right, I didn't go check mine, kids really bratty last night.   S3t Posted on Wednesday, January 04, 2012 - 08:04 pm:        COOL thanks! FUNNY though I have my parts manual for my '02 S3T and it calls for the N0002.M part number   Jayvee Posted on Wednesday, January 04, 2012 - 11:22 pm:        Well if that's the case, I guess now you won't mind getting 'Blast' bars? For some reason, things just don't fit right on the bars I have on now (sold to me as 'Blast' bars.) The grips don't quite fit, the switchgear is like a quarter-inch off. I got some Uly handguards, they don't fit, like 3/4 inch too long. There's holes in the bars to fix the switchgear in position, I didn't want to cut the pins off the switchgear, so I got some "S3T" bars. Holding the new close to the old, they look different, the center part between the left and right rise is noticeably wider on the 'S3T' bars, even though the overall width is very close (just slightly wider.)   S3t Posted on Thursday, January 05, 2012 - 08:15 am:        You beat me to the punch!!! I just measure my bars ('02 S3T). 2 big differences are: 1) spacing at clamp - S3T are 8.5" (blast appx 4-5"). This area is sure to cause more issues with swapping out. 2) Rise on S3T is 4.5" (blast is more like 6"+) hogluvr - thanks for your offer and insight.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: