G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Blackbelt Posted on Sunday, April 10, 2005 - 03:48 pm:        Anyone here know how to remove the headlight on a 2002 X-1? I took out the two screws that hold it to the bracket, figureing that the bulb would screw out the back.. nope just wires going into the houseing.... there is a little screw on the front of the light, but that has been loose since day 1..... HELP ME OUT PEOPLE!!!   Sandblast Posted on Sunday, April 10, 2005 - 04:07 pm:        If it is the same as my M2 you just un-screw all the screws around the black plastic housing, that comes off. Then the bulb will be in there under a clip. I hope you are taking it off to add a high intensity bulb from American Sport Bike, I did that last week and should have done it right when I brought the bike home, huge difference.   Blackbelt Posted on Monday, April 11, 2005 - 09:17 am:        I will double check but all i found was one screw at the base of the silver ring around the housing.. i will look again tonight...   Bandm Posted on Monday, April 11, 2005 - 10:07 am:        Remove the screw, stick a flat screwdriver between the ring and the housing, at the bottom, twist. The ring and light will pop out, catch it. Mark   Blackbelt Posted on Monday, April 11, 2005 - 10:57 am:        sweet.. that is what i thought.. but i didn't want to break anything.. lol.. thanks all

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: