Author |
Message |
Rkutzner
| Posted on Thursday, June 14, 2007 - 03:31 pm: |
|
I have a XB12STT Lightning, would like that extra inch. Are the brake, clutch and electric lines alright with just a 1" riser? Which one would you recommend ? |
Gentleman_jon
| Posted on Thursday, June 14, 2007 - 04:49 pm: |
|
I don't have a TT, but I was able to raise the bars on my XB12S a couple of inches, so I don't think you will have a problem. A real nice pair of one inch risers is made by Precision Engineering one of our sponsors. http://www.preeng.com/xcart/product.php?productid=5&cat=1&page=1
Another way to skin the cat, is to take another top clamp, turn it upside down and put it under the stock clamp. Adds 3/4" and cost about $20, not nearly as cool as the PE parts, for sure, and not a whole lot cheaper either. |
Ft_bstrd
| Posted on Thursday, June 14, 2007 - 04:57 pm: |
|
Kutzner, you shouldn't have a problem with the one inch risers. I have the center clamp and risers from PE. I highly recommend their products.
Andy Upton is top notch people. |
|