| Author |
Message |
    
Ratbuell
| | Posted on Saturday, May 19, 2018 - 10:47 am: | 
|
If you do, they should work on any tuber male-mount footpeg...let me know if you need/want a template and I can send you the remains of mine once I get the bike back from insurance. She's totalled but I'm buying back - just too much good stuff on there to shit-can it all, and I can use a lot of "tuber" stuff to work on my Defender restoration, and either sell or keep the "S2" stuff in case I get another S2. |
Purpony
| | Posted on Saturday, May 19, 2018 - 02:57 pm: |
|
Yes Dave. We have the S2 drop pegs modeled! |
Jolly
| | Posted on Sunday, May 20, 2018 - 04:00 pm: |
|
That’s what I remember, but with things moving at the “speed of life” I couldn’t guarantee it! |
Jolly
| | Posted on Friday, May 25, 2018 - 10:24 pm: |
|
Material and machining costs have been sorted, I just need to find some time to source the hardware (pricing) then I can get these up for order. |
Tripper
| | Posted on Saturday, May 26, 2018 - 08:36 pm: |
|
Where is the AW Bend info. Links above are dead. |
Tripper
| | Posted on Saturday, May 26, 2018 - 08:59 pm: |
|
http://www.badweatherbikers.com/cgibin/discus/show .cgi?tpc=4062&post=157145#POST157145 |
Jon
| | Posted on Sunday, May 27, 2018 - 02:57 pm: |
|
This is very opportune and timely. I decided yesterday to seek out a mod for my S2 kickstand. I’ll stay tuned to see what the cost is. Thank you for your research and ingenuity. |
Ebutch
| | Posted on Sunday, May 27, 2018 - 09:34 pm: |
|
Fasten your seatbelt Jon! |
Jolly
| | Posted on Monday, May 28, 2018 - 08:30 am: |
|
Rough numbers, have not had a chance to compile hardware but can get close.....family in town for holiday so I haven’t been able to get anything done....
Pretty sure at an order of 10+ units (price goes up for less units..standard law of machining as I've come to learn, since the set-up time is spread across a per unit cost) I can get these produced with pivot pin, retaining clip, return spring pin, and mounting hardware for about $375.00.
Considerably cheaper than a full set of plates for obvious reasons, time and material cost are much lower!
(Message edited by Jolly on May 28, 2018) |
Jon
| | Posted on Friday, June 01, 2018 - 01:59 am: |
|
That sounds way more attainable than the last cure. |
Reaper_pete
| | Posted on Sunday, June 03, 2018 - 04:20 pm: |
|
PM sent |
|
