| Author | Message | ||
     Damnut |
Where can I find one........ ummm two actually? | ||
| Blackm2 |
Three | ||
| Purpony |
someone send me one and ill make some  or get me accurate measurements | ||
| Brother_in_buells |
http://www.badweatherbikers.com/buell/messages/476 23/727391.html?1389140262 | ||
| Damnut |
Well I have an S1 and an S3 that I can bring by to get measurements from if we can't find any Purpony. | ||
| Blackm2 |
Maybe someone can contact Jeff(jefc73). He was going to have those and some Stenzil braces made earlier last year, but that thread faded away. Maybe he has dimensions he can share. I bugged him on a couple different threads but got no definitive response. | ||
| Phelan |
Hr had a run of the frame braces made; I bought one about 2 years ago. | ||
| Jolly |
I loaned mine to JeffC73 so that he could regen this part, he made a nice piece!! The machinist he used is the same guy I used for the new S2 side plates, he does outstanding work, however he is crushed for time these days! Purpony, I'd be happy to send you one if you'd like to make some up for folks.... Let's chat! | ||
| Jefc73 |
I can check with the machinist. | ||
| Brentx1 |
I bought one from Jeff a few years back. I would be in for another if his machinist is willing. | ||
| Gobadgers |
I received a frame brace from Jeff 2 years ago and am extremely happy with it. Jeff had a wonderful machinist make them. I too am up for a Stenzil brace if Jeff or someone else is checking into them. | ||
| Oopezoo |
I would be interested in one as well if someone ends up making a few | ||
| Johnod |
I'm interested. | ||
| Blackm2 |
No disrespect to Jeff or his machinist, but if he is busy, and Marc(Purpony) can do it, I'd prefer Marc do it. I want to send a pulley to Marc anyway. So Jolly if you can send him one that would be most excellent. | ||
| Ebutch |
 Me Toooooooooooooo  | ||
| Ebutch |
 This Buellty Please !!!!!!!  | ||
| Ebutch |
I had no trouble installing used Bank on my S2  But prefer one above with three holes . (Message edited by ebutch on January 05, 2016) | ||
| Phelan |
Banke made a unique front steel bracket to fit their brace on S2s. Your used Banke must have came with the S2 specific bracket. S1s, S3s, and M2s use the standard front bracket. | ||
| Ebutch |
Phelan got it 3 or more yrs ago. Fuzzy trying to remember it's a ebay part not many deals now like the Past. But really like the ones Jeff had made !!!!!!  | ||
| Jefc73 |
I will get a hold of Gary tomorrow and see what he has going on and let everyone know. I would prefer the machinist that helped design it make more if he has the time. If not then we can go elsewhere. | ||
| Brother_in_buells |
Jeff could there also be a change on that front pulley cover you designed? | ||
| Jefc73 |
Actually the pulley cover design came from Jolly. I put him in touch with my machinist and they worked out the details. | ||
| Brother_in_buells |
Oops ,i meant the drive support And yes Jolly organized these! (Message edited by Brother in buells on January 05, 2016) | ||
| Jefc73 |
Just curious on how many would like one of the braces that my machinist made? May be able to persuade him better if there are at least 10. Let me know. | ||
| Johnod |
Is there a pic of the Jefc73 unit? Anyone know if they get in the way of an xb oil cooler mounted in the usual spot? | ||
| Newmans3 |
I'm in for one for my S3 | ||
| Brother_in_buells |
Johnod have a look in the link on top of page! | ||
| Johnod |
Ooo nice, didn't realize that was the Jef model. Yes I'd like one. | ||
| Johnod |
I just read in one of the threads here that they don't fit the S2, so I guess I don't need one. | ||
| Jefc73 |
That's funny. I have one on my red S2. Fits fine. They were designed off the Banke and changed a bit so they weren't the same. specs are the same on how they fit. (Message edited by jefc73 on January 05, 2016) |
