G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Lakes Posted on Monday, September 24, 2012 - 05:34 pm:        Just wondering whats the best sealing primary gasket for my M2? 2000 year model. as i just got home from a 1,200k ride & primary leaking bad. was leaking b4 i left but , once it was warm from the run it got worse. as useing ATF Type F so its very thin like about 15W   Buellistic Posted on Monday, September 24, 2012 - 07:57 pm:        IMHO, the HD gasket is as good as it gets and on my 3rd reuse ...   Lakes Posted on Tuesday, September 25, 2012 - 03:16 am:        thank you Buellistic, i just got a new genuine gasket. i cleaned the oil off an put white body powder all over or under the primary & drain plug will check level and top up if needed tomorrow. then i'll ride till its warm see where the oil is coming from.   Jayvee Posted on Tuesday, September 25, 2012 - 11:09 am:        On the primary gasket, goop or no goop? I used Hylomar last time, but not sure if it's better without it. ? I tend to put some kind of gasket sealer on myst gaskets.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: