| Author | Message | ||
     Harleyms |
At some point during one of my insomnia fueled archive browsing sessions I saw a thread or post about using sealed bearings in a X1 swingarm....it involved part numbers. Now I can't find it, would anyone happen to know what I'm talking about? When I pulled the bearings out of the swingarm I plan to install on my S1W there was what I can only describe as hay stuck to the grease inside the swingarm....no ideas how it got in there but I like the idea of sealed bearings anyway I'm guessing that if you use a sealed bearing then you don't need the outer seal either? Thanks | ||
| Hybridmomentspass |
http://www.badweatherbikers.com/buell/messages/476 23/630518.html there are the PNs for the bearing call up a local hardware store and they'll likely have them in stock I didnt pay much at all for mine locally (thnking it was under 20 for everything, bearings and races) |
