| Author | Message | ||
     Jayvee |
This topic of "Catch Cans" comes up a lot, there are some on eBay, and some sponsors that cost $125 or more. This is less than $20, and I personally like to see the weld line. That way you know it's not plastic or cast pot metal. http://cgi.ebay.com/ebaymotors/Small-Polished-Oil- Breather-with-1-5-clamp_W0QQcmdZViewItemQQ_trkparm sZalgoQ3dSIQ26ituQ3dUCIQ252BUAQ252BFICSQ26otnQ3d8Q 26pmodQ3d260624011999Q26poQ3dLWIQ26psQ3d63Q26clkid Q3d7233213732841972194QQ_trksidZp4712Q2em263QQcate goryZ46093QQitemZ260605696156 | ||
| Andymnelson |
Just got me one of these: http://www.pegasusautoracing.com/productdetails.as p?RecID=4703 Cheap, VERY high quality, and came with the needed fittings. And no need for welds since it's spun from aluminum  The eBay one looks good tho...if I had a 1.5" horizontal bar to clamp it to... |
