G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Forum » Old School Buell » M2 Cyclone » Archive through July 23, 2010 » Airtech GP tail on M2 « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Koz5150
Posted on Saturday, February 20, 2010 - 12:44 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

So as some of you know (and probably saw on eBay) I was lucky enough to win the Airtech tail for a whopping $51 last week. It is definately a used piece, but I am real happy with it. So I took the old body work off today and tried to place the new section on. Well, it will need a little bit of "tweeking", however I am happy to report no major fram modification! I found that on the right side of the bike the bank sensor and the ignition controller were causing some clearance issues. I am thinking the bank sensor can be removed, I will have to read up on that. I moved the ingnition box over to the next set of holes (note sure why there are two sets?) and that helped a lot. The bottom of the ignition box sticks out so that everyone can clearly read the "FOR RACE USE ONLY" stamped on it. I may have to rattle can that part. The fuse box with the two relays may also have to be moved. It looks like this will all work though without having to do any wire cutting. BONUS!

Here is a pic (from my phone) of the tail on the bike.


1


I am still thinking all white with orange rally stripes and possibly a race number. The white on the tail section currently has a pearl coat that looks really nice, I may have to consider an orange tinted pearl over the white. Also, I am going to take one of the additional tail sections I own and have that painted white so that I can switch the bike back to being a two up machine and keep the white color scheme. All of the current Volcano Grey parts will be saved also.

On a side note I would just like to say, this bike is so nice to work on as I can pretty much get to everything and find it very easy to understand how to change and fix things with my basic garage knowledge and the Shop manual. I sold my 1978 Camaro 3 years ago because it just got to overwhelming to work on and every day the weather was nice it sat in the garage while I was out riding my Cyclone. I think this M2 will be with me for a long long time.

(Message edited by koz5150 on February 20, 2010)
Top of pagePrevious messageNext messageBottom of page Link to this message

Koz5150
Posted on Saturday, February 20, 2010 - 12:51 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Oh yeah, if anyone knows of somebody with a S1 solo seat, any condition, I need one. THANKS!!!
Top of pagePrevious messageNext messageBottom of page Link to this message

Fuzzy
Posted on Saturday, February 20, 2010 - 01:30 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

you went from the big butt m2 seat to the big butt airtech tail : )
should be plenty of room for ALL your electrics under that thing if you do splice some wires.
still like the dt tail better...


xr750dt tail
Top of pagePrevious messageNext messageBottom of page Link to this message

Dave_02_1200
Posted on Saturday, February 20, 2010 - 08:12 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Fuzzy,

Did you have to cut your frame loop to fit that seat?

I like the way it looks.
Top of pagePrevious messageNext messageBottom of page Link to this message

Koz5150
Posted on Saturday, February 20, 2010 - 08:28 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Fuzzy,
I have a 1,000 mile trip planned for August. That tail doesn't look like a place I would want to put my butt for that long of time. Also I am not sure that tail would look right with the Manta tank.
Top of pagePrevious messageNext messageBottom of page Link to this message

Nevrenuf
Posted on Saturday, February 20, 2010 - 08:35 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

yea, the white/orange will look great and it's good to know you won't have to butcher anything to get what you want. hopeing to get up there toward the end of april for the granddaughters first birthday(their living outside of reedville) and hopeing to see svh while i'm there. maybe we can get over that way to take a look at the progress. i'd like to get into appleton to eat at the hu-hut, the mongolian stirfry place.
Top of pagePrevious messageNext messageBottom of page Link to this message

Koz5150
Posted on Saturday, February 20, 2010 - 09:30 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Where hunger meets it's destiny!!!

Yeah, I was not going to use the piece if I had to cut the frame. Also I wanted to be able to put the stock tailsection back on if I am going to do some 2 up riding. A few years ago I set up my tail section so I could swap it out quickly (10 minutes if even) by installing a 6 wire plug on th tail light. That way when I took the bike to the track I wouldn't have to use my stock bodywork, just in case. Lucky I did too, I had a "oops" moment and flipped the bike at 85 mph in the grass.
Top of pagePrevious messageNext messageBottom of page Link to this message

Fuzzy
Posted on Saturday, February 20, 2010 - 07:05 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

thanks dave, no, no cutting. that was a priority. did grind off the tabs for the flasher i think it was, to clean up that side...

ken: yeah, seat did end up pretty hard but the 5/16 foam is the same as on my xb and is comfy there. think just the difference between kidskin and cowhide.
seemed to look ok with manta on mine but it wouldn't clear the bars. extra fuel would have been nice though!
Top of pagePrevious messageNext messageBottom of page Link to this message

Rjn
Posted on Thursday, March 18, 2010 - 04:57 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)









Found this one on the www.
it's an S3 with i think an airtech GP tail
Top of pagePrevious messageNext messageBottom of page Link to this message

Psyclown
Posted on Wednesday, April 21, 2010 - 02:57 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I've never seen that "dt" tail and i like it. Do you guys have more pics? Where can I get one?

EDIT: I found your post saying its a HD XR 750 dirttrack tail here:

http://www.badweatherbikers.com/buell/messages/47623/415949.html

Fuzzy- any chance you have pictures of this with your manta tank?

(Message edited by psyclown on April 21, 2010)
Top of pagePrevious messageNext messageBottom of page Link to this message

Xldevil
Posted on Friday, April 30, 2010 - 10:18 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Wouw.
That air tech thing is really big and ugly.
I like the S1 tail on my Cyclone.
The DT tail looks also nice.

Ralph
Top of pagePrevious messageNext messageBottom of page Link to this message

Cyclonemick
Posted on Friday, April 30, 2010 - 11:47 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

What is up with that shock???
Top of pagePrevious messageNext messageBottom of page Link to this message

Brinnutz
Posted on Friday, April 30, 2010 - 12:56 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

That's a Wilber's Shock IIRC. It uses a standard push pull type shock with a bit of bracketry to make it work...really neat design, costs about an arm and a leg though, and maybe a right testicle.
Top of pagePrevious messageNext messageBottom of page Link to this message

Brinnutz
Posted on Friday, April 30, 2010 - 12:57 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Wow, they are on their last one...

http://www.twinmotorcycles.nl/webshop/artikel.asp? guid=YXHFSC&aid=470&cid=495&s=&a=
Top of pagePrevious messageNext messageBottom of page Link to this message

Cyclonemick
Posted on Friday, April 30, 2010 - 03:09 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Pretty wild, Never seen one! I have heard about push shocks just never seen one! Do you know the abbreviation for Currency Convertor? ( curious aboout parts cost on twin site) I have one on my phone but don't know which Abreviation to use?
EUR,GBP,CHF,SEK,DKK,NOK,SGD,INR,AED,KRW,THB,ILS,JP Y??? Any help would be appreciated!
Top of pagePrevious messageNext messageBottom of page Link to this message

Rjn
Posted on Saturday, May 01, 2010 - 01:52 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Eur convertion should do the trick.
think about $2000,-
Top of pagePrevious messageNext messageBottom of page Link to this message

Cyclonemick
Posted on Saturday, May 01, 2010 - 11:53 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Cool! Thanks!
Top of pagePrevious messageNext messageBottom of page Link to this message

Mick
Posted on Sunday, May 02, 2010 - 01:31 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

3,263 $ au , I got a Penske.
Top of pagePrevious messageNext messageBottom of page Link to this message

Xldevil
Posted on Saturday, May 08, 2010 - 06:58 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)










The Wilbers shock has a 5 years warranty(at least in Germany)and is also available in the US.
http://www.motorcycle-suspension.com/
Todays price is about 1600 USD.The Euro is falling,you know.
I can say,it makes a huge difference in riding comfort and security.It is worth every cent.

A good explanation how it works,regarding the Hyperpro shock,which is identical.
http://lightning.prohosting.com/~buells2t/shock.ht m
Regards,Ralph








(Message edited by xldevil on May 08, 2010)
Top of pagePrevious messageNext messageBottom of page Link to this message

Bigdaddy
Posted on Saturday, May 08, 2010 - 02:02 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Ralph,

Great to see you post...it's been a long time. Wie geht es Inhnen?
Top of pagePrevious messageNext messageBottom of page Link to this message

Cyclonemick
Posted on Tuesday, May 11, 2010 - 03:25 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

That's pretty slick! Thanks for the Link!
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration