| Author | Message | |||
     Revz |
Anybody know the rise, in inches, for a set of S3T handebars? I've researched the archives a bit and seen bar comparisons but I can't seem to find actual dimensions... Thanks in advance! Larry | |||
| Richsm2 |
approx 6.5 inches to the center of the grip. | |||
| Revz |
WOW! That was quick...this place is awesome. Thanks! Larry | |||
| Fullauto |
There was an optional higher set. Don't know the height, but, as usual, someone here will. | |||
| Mick |
I've got a set off an S3, theres not a lot of difference from my M2 bars, just a bit more pull back than the M2. | |||
| Richsm2 |
that is what I have on my m2- s3 bars, 6ft 3. upright sitting and just slightly forward.makes a different bike out of it, had to adjust my rear shock to s3 settings on compression. I ride mostly 2 up so is slightly stiff solo but sporting. got them from Al. no back pinching, injured back 40 yrs ago,I like them. With bags the front seems a bit lite. | |||
| Crackhead |
I believe they are the same bars that were put on the Blast. | |||
| Buell_bert |
The S3T and Blast bars are the same and an inch and a half to two inches higher than the M2 bars. | |||
| Jayvee |
Well darn, I can't find the S3-T measurements, but they aren't the same as the blast, I think they are 1 inch wider. I have one of each, I'm sort of in the (slow) process of replacing my Blast bars with S3-T bars, and they are different. The center low part is wider, that's easy to see, and they are about an inch wider or so. Here's the others' measurements:
|
