G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Italialaw Posted on Tuesday, August 21, 2007 - 06:08 pm:        I posted this in KV as well: I am trying to install this aftermarket regulator and the male bullet connectors off the regulator are too large for the female bullet connectors leading from the main circuit breaker. In fact the rubber shroud around the male connectors is completely different from the round stock one from my old regulator (which I pitched, could kick myself as I could've used the stock male connectors and spliced them onto the crane wires) Does anyone know the size of the male connectors off of the stock regulator? Part no.? I am speaking of the two that are hooked together in a round rubber shroud. Any suggestions would be appreciated. Thanks   Natexlh1000 Posted on Tuesday, August 21, 2007 - 07:13 pm:        Is that the type od regulator that needs a new type of stator?   Italialaw Posted on Wednesday, August 22, 2007 - 04:37 pm:        Does anyone use this regulator on their buell? Crane Part No. 8-4061 http://www.cranecams.com/?show=browseParts&lvl=4&p rt=2087&action=partSpec&partNumber=8-4061   Buellistic Posted on Thursday, August 23, 2007 - 11:02 am:        Go to Radio Shack !!! In BUELLing LaFayette

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: