G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Elmono Posted on Sunday, August 13, 2006 - 01:04 pm:        I drilled out the slide, changed to a 45 slow jet and a N65C needle and set the screw to 2.5 turns out. Now the idle is fine, both at closed and open choke, but when I throttle it stalls and gas pours out of the air cleaner. I had the air cleaner off once when I throttled and gas flew out of the carb. Lots of black smoke. What the heck did I do wrong? FYI, 10R12 plugs, sea level, D&D exhaust and Forcewinder.   Tunes Posted on Sunday, August 13, 2006 - 01:22 pm:        Black smoke = rich fuel mixture. Your pouring in too much gas. White smoke = oil burning   Aldaytona Posted on Sunday, August 13, 2006 - 01:33 pm:        Float hung up, out of adjustment now? Glad the needle nose vise grips helped. M2 s rock   Tnm2 Posted on Sunday, August 13, 2006 - 02:43 pm:        If it only pours when the revving, that would lead me to think it is a problem with the needle or main jet, since the slide only pulls up when the throttle is opened. A thought....the main jet fell out of the emulsion tube? This would have the needle uncovering a big hole.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: