Author |
Message |
Gbackus
| Posted on Sunday, March 14, 2010 - 04:39 am: |
|
I seem to have misplaced mine and could use a set. If anyone has a digital copy or can scan a set for me it'd be much appreciated |
Froggy
| Posted on Sunday, March 14, 2010 - 12:39 pm: |
|
http://www.froggypwns.com/buellpdfs/Buell_Heated_H and_Grip_Kit_INSTRUCTIONS.pdf |
No_rice
| Posted on Sunday, March 14, 2010 - 12:42 pm: |
|
theres heated handguards too? |
Froggy
| Posted on Sunday, March 14, 2010 - 12:51 pm: |
|
Mine heat up when I slide across the pavement |
Toona
| Posted on Sunday, March 14, 2010 - 04:03 pm: |
|
I'm thinking about getting a set of these for my 1125R, Are the instructions the same? Do I use the Firebolt instruction guide? |
Froggy
| Posted on Sunday, March 14, 2010 - 04:20 pm: |
|
I didn't actually read the instructions, I assume it would be the same as the firebolt. Remove old grips, drill holes in left handle bar, install, plug in connector to the plug under the fairing, and enjoy. |
Gbackus
| Posted on Sunday, March 14, 2010 - 07:59 pm: |
|
The instructions are a little differnt for the 1125 Whig is what I needed there s a capped plug there are two plugs, one gets plugged in and one capped I just can't remember which whiich is why I needed the instuctions, lol thanks froggy, but does anyon have the addendum for the 1125 or can they tell which plug is the one hat needs to get swapped? |
Froggy
| Posted on Sunday, March 14, 2010 - 08:13 pm: |
|
There is only one plug on the bike, it only fits on the grips one way. The grips have the second port so you can daisy chain other accessories on top of that. |
Toona
| Posted on Sunday, March 14, 2010 - 09:25 pm: |
|
There is only one plug on the bike, it only fits on the grips one way. The grips have the second port so you can daisy chain other accessories on top of that. Thanks for the clarification Froggy! |
|