Author |
Message |
Swordsman
| Posted on Wednesday, February 24, 2010 - 03:38 pm: |
|
http://www.badweatherbikers.com/buell/messages/21/ 541529.html?1267043821 Just a heads up. What can I say, I'm impatient. ~SM |
Sparky
| Posted on Wednesday, February 24, 2010 - 06:38 pm: |
|
Don't wait. I ordered a set through Glendale HD/B in Ca. Had them in 3 days. Put them on my 1125R. |
Swordsman
| Posted on Wednesday, February 24, 2010 - 09:12 pm: |
|
Okay, ya gotta post pics of THAT combination up! Never heard of anyone putting the plates on an 1125. ~SM |
Tq_freak
| Posted on Wednesday, February 24, 2010 - 09:17 pm: |
|
I got a set I might part with, tryed to put them on my CR but didnt want to trim them. |
Xb9er
| Posted on Thursday, February 25, 2010 - 09:16 am: |
|
Do it Will. That would look amazing! |
Swordsman
| Posted on Thursday, February 25, 2010 - 01:08 pm: |
|
Tq_, PM sent! ~SM |
Sparky
| Posted on Thursday, February 25, 2010 - 03:02 pm: |
|
Here ya go... pics1, pics2 (about 7th down), pics3 and a racing CR. For each plate I fab'd a 2" spacer cut from 5/32x1" aluminum bar stock from Home Depot to space out the rear mounting hole, made a strut by flattening a 5/16" OD SS tube, and used the stock shouldered washers in the mounting holes. |
Swordsman
| Posted on Thursday, February 25, 2010 - 04:41 pm: |
|
Man, it's crazy how well those number plates work with the 1125! Perfectly mirrors the pods. Very nice! ~SM |
|