G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Bluzm2 Posted on Wednesday, July 09, 2008 - 02:08 pm:        Does anyone know size and thread pitch of the stator end of an old tuber crank? It's off a 1997 S1 so it should be the same size as the Sportster... I've got a dead S1 in the garage with buggered threads that need cleaning up. I'd rather use a die than a thread cleanup file... Thanks! Brad   Bluzm2 Posted on Friday, July 11, 2008 - 12:09 am:        Anyone? Anyone? Thump! Thump! Is this thing on?   Xldevil Posted on Friday, July 11, 2008 - 02:20 am:        Try to contact NRHS,Revolution Performance,darkhorsecrankworks or Cycle Rama. I´m pretty sure they´ll know. Ralph   Capndoug Posted on Saturday, July 12, 2008 - 09:13 pm:        I have one out of a 2000 S3T for inspection with a caliper. Major dia - 0.746 Minor dia - 0.702 8 threads in .500 in Look up in a Unified National thread table It matches up to 3/4-16.   Bluzm2 Posted on Sunday, July 13, 2008 - 10:03 am:        Doug, thanks! That was my rough measurements as well. I'm going to try and pick up a die today to chase the threads.. Brad

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: