Author |
Message |
Maxbuell
| Posted on Monday, September 17, 2007 - 08:05 am: |
|
Looking for after market top clamp for 02 M2. Took the gauges off and would like a smooth clamp with out the mounting for the gauges. |
Jayvee
| Posted on Monday, September 17, 2007 - 03:03 pm: |
|
Wouldn't the Precision Engineering one work? See the sponsor section. http://www.preeng.com/xcart/home.php?xid=615bf4358 f72d1a961325f7e77b5b9aa I just recently got their 7/8" bar riser set for my M2. When I was looking into it, I was told by somebody that the clamp is the same. So maybe this clamp would work for you? |
Maxbuell
| Posted on Monday, September 17, 2007 - 03:47 pm: |
|
Jay I was looking at that but says it's for a XB sure looks like it would fit thou |
Jayvee
| Posted on Monday, September 17, 2007 - 06:16 pm: |
|
Yeah, the bar risers were first listed as XB items, but then when I questioned it, it turned out they work on M2 as well. I would guess the clamp is the same deal. |
Tim
| Posted on Monday, September 17, 2007 - 07:18 pm: |
|
I know a stock S3 clamp will work. |
V74
| Posted on Thursday, November 15, 2007 - 01:53 pm: |
|
was thinking of doing the same thing but mount the gauges to it,any thoughts on this?the cnc clamp must be 200gm lighter?will the angle of the gauges be to shallow and the clamp needing modifying to get a good angle to read them??? |
|