G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Ezblast Posted on Saturday, March 03, 2007 - 11:54 pm:        I did the adjustment as it said to in the book, shift to 3rd so detent plate is as the picture in the book to do the adjustment, adjusted per spec - done. Now I can't get it back into neutral - why? - should I try rolling it a bit to turn the gears? GT - JBOTDS! EZ   Ezblast Posted on Sunday, March 04, 2007 - 11:48 pm:        I Found Neutral - rocking the bike and rolling just a bit, no light but neutral - it will do, opened the gasket, non-metal, but not paper either - thought I had it lined up, but the bottom buggered up, now I have to get a new gasket again - argh! GT - JBOTDS! EZ   Chevysolid Posted on Wednesday, January 16, 2008 - 08:52 pm:        Ez, did everything end up ok when doing this I am doing the same on a 2000 X1... Anything I should know about..

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: