Author |
Message |
Xldevil
| Posted on Friday, June 16, 2006 - 12:10 pm: |
|
That's what I found,when I opened the primary. After electrical break down yesterday,I ohmed more than 4 Ohm between pins on alternator plug, voltage output was zero. How can both cables loose the insulation after only 30K kilometers?Never moved that cable or the alternator.
Ralph |
Djkaplan
| Posted on Friday, June 16, 2006 - 03:15 pm: |
|
At 45K kilometers (28K miles) I had the same deterioration of the wire insulator that caused stator failure. This is an area that definitely needs to be improved. |
Jkhawaii
| Posted on Monday, July 10, 2006 - 11:58 am: |
|
what type of primary/trans oil was used on both the bikes? |
|