G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Xldevil Posted on Tuesday, January 24, 2006 - 03:20 pm:        Hallo. Is it possible, to replace the left-hand (outer) sprocket shaft bearing without removing the flywheel assembly from the crankcase? Only the bearing,not the race! Ralph (Message edited by Xldevil on January 24, 2006)   Blake Posted on Wednesday, January 25, 2006 - 01:18 pm:        I don't know. Anyone?   Izzinya Posted on Thursday, January 26, 2006 - 11:06 pm:        they are pressed on the shaft i cant think of a way to get em out Izzinya   Hobanbrothers Posted on Wednesday, February 15, 2006 - 09:47 pm:        Are you talking about Timken bearing or INA bearing? If it is a INA (XB) I Never thought of trying, I guess if you can get it out, I would assume you could get new on in. Do you have reason to try? If it is a Timken, it is pressed on and I can not see a way of getting it off and if it needs to be replaced, so should the inner bearing and the corresponding races.   Buellistic Posted on Thursday, February 16, 2006 - 10:04 am:        Get a FACTORY MOTORS MANUAL and PARTS BOOK for your YEAR/Model !!! IMO, "NO" !!!

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: