G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   M202 Posted on Monday, January 09, 2006 - 01:59 pm:        I'm about to put in a 88" in my M2. Besides the boring out the head and block, is there anything else that would need to be done? I'm also going to put cams in.   Rocketman Posted on Monday, January 09, 2006 - 05:07 pm:        Yes for sure there is. Choice of piston - comp ratio? Gas flow? Pushrods and followers? Carb? Exhaust? You can't expect miracles just by upping the motors capacity. There's loads more and it's a science. Even an art form, searching for more performance. You need to start by asking yourself, what do you want? Rocket   Xldevil Posted on Tuesday, January 10, 2006 - 03:59 am:        And don't forget cams and ignition! Better brakes are not the worst idea,IMO. Ralph

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: