| Author | Message | ||
     Thunder |
Fuscat, I haven't talked to anyone, but I would assume that they are meeting at the OTHER PLACE for bike night and dinner. I won't be there, I'll be pulling off my forks tonight and taking them to Topeka tomorrow. I do plan on making the CLUB meeting next Wednesday.... Jeff | ||
| Cyclone1 |
Blaster, It'sa hard to guess the true extent of damage that was done to your bike via net. That said, I would listen for an exaust leak if you suspect the studs to be screwed up. You might even take a 1/2 in. socket and see if the stud turns with the nut. I'd say other than that, that area should be ok, once again "without seeing the bike". Hope I could help ya..... Fuscat, E-mail me your full name, address, and phone number(s) so I can get ya entered in the system. We pinged Buell on the recall status...all except 1 are open. Shock, swingarm, tank breather valve, sidestand switch, and a couple others I can't recall atm. You can call me at work too...913-422-3400 Sorry about the wait...meant to catch you tonight at the other place.  | ||
| Blaster420 |
Frank, Believe it or not, it helped a lot. Thank you. Ben | ||
| Kcbill |
Kcfirebolt that might have been Dennis. Dsxb9s He's our resident Federal Marshal. | ||
| Kcbill |
Any body want to take a run up to Topeka Harley Sat. Neil wants to visit the dealer he's heard so much about. He wants to leave 10:30 to 11:30. Who is interested? Say we meet at Central HD. What say ye? | ||
| Fuscat |
Frank- you got mail at your hotmail address. KCBill- I am in for the Topeka Run on Saturday. What time are you guys thinking of meeting up?? | ||
| Kcbill |
how about 11am. | ||
| Fuscat |
Sounds good. I am in.  | ||
| Usapitbullz |
Has anyone seen?  | ||
| Kcbill |
Would that be super Sam? | ||
| Neill |
Derek, Does the parts list below look correct for the foot peg conversion we were talking about in Topeka? Spring loaded footpeg conversion: 50178-96Y E-clip 2ea $0.70 50794-00Y Spring, Footpeg pivot 2ea $4.30 50795-00Y Pin, Footpeg pivot 2ea $3.50 Optional: 50785-98YA Footpeg Assy, left 1ea $8.10 50786-98YA Footpeg Assy, Right 1ea $8.10 Aluminum Millenium X1 Peg Part # Left Peg N0403.Q $6.95 Right Peg N0404.Q $6.95 (see above for spring load parts) Neill | ||
| Farrisbueller |
Trying to get opinions and definitive cost on Nallin 121Hp 1250 VS 88" kit. thanks | ||
| Gravedigger |
GONE TO JAMAICA!!!!!!    | ||
| Blaster420 |
Keith, Have fun, see ya when you get back. Ben  | ||
| Fuscat |
Neill You got it! total your looking at $44.80 unless prices have changed. I was a little off but pretty close!  I can't remember now what these are: Optional: 50785-98YA Footpeg Assy, left 1ea $8.10 50786-98YA Footpeg Assy, Right 1ea $8.10 I don't think I used them I can't remember. That would have made my total more and I don't remember it being that high. I ordered all the parts through David Chall at Topeka. I like the setup. I think polished out would look nice, just something I don't have the money for. Seems to be alot of that lately! | ||
| Dave |
50178-96Y E-clip $ .99 2ea $1.98 50794-00Y Spring, Footpeg pivot $13.99 2ea $27.98 50795-00Y Pin, Footpeg pivot $ 3.50 2ea $7.00 N0403.Q Y2K Left Peg $11.99 1ea $11.99 N0404.Q Y2K Right Peg $11.99 1ea $11.99 That was the price I was gouged for over here in Apr. DAve | ||
| Racerboy |
This is from the HSTA board and SLAB...See if you guys have any interest in it...The Elbow Inn is a biker bar just a bit west of Rolla on a beautiful stream...And the BBQ is great, to boot... Next Saturday's Ride to Rolla Ed Young and I were thinking that next Saturday might be a good time to go back to The Elbow Inn for some BBQ...There will again be a swimming opportunity as, most of you know, it's right on the Big Piney river...We'll post directions later in the week...I was thinking a 0900 Eureka QT leave time would give us a bit of a chance to ride some better roads on the way down... See Ya! Bob | ||
| Fuscat |
Just a quick question sorry if it has already been asked atleast 2 times.. Who all are going to waterloo on the weekend of the 20th? I am trying to see if I may be able to go I was just wondering what time your leaving where your staying what time you returning and if you would mind a tag-along like myself etc etc? Not sure if it is do-able yet I would like to though! Feel free to email me off the board! | ||
| Cyclone1 |
WOOT! Got my heads today  You guys do know we are a Buell dealer at Central, right?? See you all wed., perhaps with a few more horsies under me | ||
| Neill |
Derek, I went to Central today to purchase the peg set-up, but the package now retails for $125.00 since the parts sub to new numbers. It looks like I will try the Topeka, or Waterloo dealers next to see if they can do better. Neill |
