G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Yellow_xb9s Posted on Friday, September 17, 2004 - 02:17 pm:        Does anyone know? If so, what would the gearing reduction amount to? thanks!   Darthane Posted on Friday, September 17, 2004 - 02:36 pm:        I doubt it would fit in the swingarm even if the teeth were the same pattern. ...can I ask why?   Yellow_xb9s Posted on Friday, September 17, 2004 - 02:42 pm:        Just curious... Well, that, and I imagine wheelies would come pretty easy with that kinda gear reduction.   Captainplanet Posted on Friday, September 17, 2004 - 02:44 pm:        The blast uses a completely different belt. It is not nearly as wide as the xb belt. I don't know if the pitch is the same or not. The rear pully on the blast mounts on the spokes of the rear wheel, not on the center hub as the xb.   1320 Posted on Friday, September 17, 2004 - 07:02 pm:        Will not fit..period.   Jerseyguy Posted on Saturday, September 18, 2004 - 11:06 am:        I think Trojan has a "Torque" belt and pulley kit that lowers the overall ratio. As I recall it was pretty pricey.   Tikiman1 Posted on Saturday, September 18, 2004 - 11:42 am:        I think trojan also has a torque primary gear so that it doesn't screw up your speedo also.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: