| Author | Message | ||
     Misato |
I got charged an hour so total it was $88 and thats all they did. high/low? | ||
| Daves |
Sounds high to me. Dave Iowa HD/Buell (Buell Cycle Center) | ||
| Skeenix |
I paid $25 at the dealership. The service guy asked me why I wanted it done, like it was a very unusual request. He billed for .5 hours labor. | ||
| Darthane |
They shouldn't charge you more than a half hour's labor for that. It'd be $35 around here. Less if I can convince Spidey to 'liberate' the Scanalyzer. Hehe... | ||
| Dynarider |
At Hals they will charge you the minimum which is 15 minutes...cost me $18. Anyone charges more & they are ripping you off. | ||
| Misato |
yeah thats what I thought. I didn't see how much it was until I was paying for it at the parts counter. it was at DHD for those of you in the seattle area. | ||
| Bud |
Did you do the tps by your dealer were you bought it ??? I have let theme do the tps several time’s, and bin to several different dealers and the never asked any thing fore it , perhaps it’s a yurop thing ( 2 years warranty ) gr,B | ||
| Freyke |
I was quoted $38.00 (1/2 hour labor)... I used to have the 4000RPM hiccup... It went away about 700miles ago and has not been back... I did change gasoline brands... I was fueling up at a brand-X station in the midddle of my ride... now I wait until I get to some brand name petrol... I've been having good luck w/Citgo lately.... | ||
| Buckinfubba |
we charge 15$ to do it. it shouldn't take more that 15 mins brian tilleys 704-872-3883 buckinfubba@hotmail.com | ||
| Essjay |
Great, I am set up to take my S3 in to Destination HD/Buell next thursday to calibrate the tps and here I read that I better take along some butt lube for my wallet. I guess I better negotiate before I hand over the keys. Anyone have better luck with the next dealer north on I-5? Shane Posted on Monday, August 25, 2003 - 06:17 pm: -------------------------------------------------------------------------------- I got charged an hour so total it was $88 and thats all they did. high/low? Posted on Monday, August 25, 2003 - 11:54 pm: -------------------------------------------------------------------------------- yeah thats what I thought. I didn't see how much it was until I was paying for it at the parts counter. it was at DHD for those of you in the seattle area. | ||
| Easyflier |
Essjay, Guess it depends on the dealer policy, some might have a 1 hour minimum. I've only had it done once and they charged for 1/2 hour of the usual labor rate. | ||
| Essjay |
Well, I could see going for a 1/2 hour minimum for a 5 minute job, but not an hour. If they want to go for an hour I will think of some other things they can do to fill their time, maybe a timing check. Thanks for the comeback easyflier. Shane |
