| Author | Message | ||
     Skarecrow |
For those of you that have removed the stock mirrors on the XBS and went for the bar-end look, what did you use to cover the holes left from the stock mirrors? | ||
| Rr_eater |
Call Al at American Sport Bike, he know the plugs well!! Bruce | ||
| Ted |
i went to an auto shop and bought upholstery plugs | ||
| Bads1 |
Hardware store. Black snap in plastic plugs. | ||
| Gentleman_jon |
I just used the proper metric bolt, ( I forget the size), and then painted them black. Just bring the mirror to the hardware store, find a nut that fits, ( 8mm / 1.25 or something like that), and get two short bolts of that threading. | ||
| Skarecrow |
Thanks for the replys, looks like I am headed to Lowes. | ||
| Beachbuell |
You can get the plugs that are used on the 12R models. There is a part number for them and they can be ordered in pairs. | ||
| Jumpinjewels |
I picked up the 12R plugs at the local HD dealer, but if you use them, be careful, I broke mine when I put them in and my hubby ended up having to take them out and put in some plugs that he picked up at Lowes. | ||
| Staindus |
I got a set of interior screw hole plugs from a Porsche 944 (free!) LOL it fit perfectly I guess you have allot of options | ||
| Pokinatcha |
on mine one of the plugs was longer than the other which goes into the deeper hole in the control. | ||
| Chadr81 |
I used the plugs from the 12R too. Local Harley shop had them in stock, and they were really cheap!! | ||
| Snakedriver |
They make great GPS mounts as well. |
