|Posted on Friday, October 14, 2016 - 11:19 pm: ||
Still having charging problems with my 1125
I have had the rotor drilled and the Ricks voltage reg. . On start up the bike charges at 14,3and as the bike warms and the fans cut in the voltage slowly drops down to 12.4. I pull the fan fuse and the charge goes back up to the high 14s,put the fuse back and it starts dropping again. I put new fans and same result. The voltage drops only when fans are on. What do you guys think ?
|Posted on Friday, October 14, 2016 - 11:32 pm: ||
some ideas from the google results:
(bad connection between VR and battery...did you solder all the connections you made when you installed the new VR?)
(fans...pulling too much current)
|Posted on Saturday, October 15, 2016 - 08:31 am: ||
You also can contact http://www.srwmoto.com.au/contact
Peter is very helpful and has a lot of knowledge.
|Posted on Monday, October 17, 2016 - 09:50 pm: ||
I have the same set up with fans running and all 4 head lights on at idle 14.1 check the voltage to each fan motor.