| Author | Message | ||
     Aussie_bueller |
Gidday Guys Still having charging problems with my 1125 I have had the rotor drilled and the Ricks voltage reg. . On start up the bike charges at 14,3and as the bike warms and the fans cut in the voltage slowly drops down to 12.4. I pull the fan fuse and the charge goes back up to the high 14s,put the fuse back and it starts dropping again. I put new fans and same result. The voltage drops only when fans are on. What do you guys think ? Please HELP | ||
| Nuts4mc |
some ideas from the google results: http://www.badweatherbikers.com/buell/messages/290 431/718036.html?1375321590 (bad connection between VR and battery...did you solder all the connections you made when you installed the new VR?) http://www.badweatherbikers.com/buell/messages/290 431/774006.html?1452398932 (battery size/type) http://www.badweatherbikers.com/buell/messages/290 431/582963.html?1280455517 (fans...pulling too much current) hth | ||
| Brother_in_buells |
You also can contact http://www.srwmoto.com.au/contact Peter is very helpful and has a lot of knowledge. | ||
| Dennis_c |
I have the same set up with fans running and all 4 head lights on at idle 14.1 check the voltage to each fan motor. |
