|Posted on Friday, December 18, 2015 - 09:02 am: ||
I have a 09 1125r and had the stator issue occur. Just sent in my stock rotor to Twin Motorcycles. Was wanting to know if replacing the stock VR is a "must do" or if it shouldn't be a problem after installing the new rotor mod? Any help, and with as much detail, would be greatly appreciated since I'm not as skilled mechanically as most of you.
|Posted on Friday, December 18, 2015 - 05:30 pm: ||
I contacted EBR last year when i did my stator/rotor upgrade. they told me if everything else is working as it should, the stock vr would be fine. I still bought a replacement just in case. I think i spent around $120 for a new hotshot series from Rick's, which is cheap insurance for me in the BFE areas i ride.
|Posted on Saturday, December 19, 2015 - 01:34 pm: ||
I have Ricks hot shot with CE605 VR with about 20,000 miles all is good with heated grips, gloves,and jacket all on 13.9 to 14.V take off grips 14.2 to 14.4V