|Posted on Saturday, September 13, 2014 - 08:45 pm: ||
Just wanted to say thanks to everyone for all the great posts and abundance of information on the charging system issues. I was having system voltage errors on my display and then it would shut off, later resuming a few miles down the road at 14v. Just finished changing my VR and did the EBR rotor at the same time. Ordered the EBR ECM too but didn't install it yet, wanted to make sure my charging issue was solved first. After a short test ride, no errors and maintained 13.5-.14.5v. So hope all is well for now. Thanks again for all the trial and error words of wisdom.